What are the 5 steps of lock out/tag out?

1. Step 1: Develop and document your energy control program and policies.
2. Step 2: Create and post written, equipment-specific lockout procedures.
3. Step 3: Identify and mark all energy control points.
4. Step 4: Training, communication and inspection.
5. Step 5: Equip your employees with the proper lockout tools and warning devices.

How do you write a lock out/tag out procedure?

Lockout Tagout Procedure in 8 Simple Steps

1. Find the procedure to be used.
2. Notify anyone affected by the lockout tagout.
3. Locate all listed energy sources.
4. Shut down the machine or equipment.
5. Lockout and tag all energy isolating devices.
6. Release any stored energy (steam, hydraulic, etc.).

What is a LOTO kit?

Lockout/tagout (LOTO) products lock down equipment to keep it from being powered on down during maintenance and repair work. They’re commonly used on machinery, electrical equipment, and plumbing systems to reduce the risk of injuries from unexpected startups.

What is Lototo in safety?

What Does Lockout Tagout (LOTO) Mean? Lockout/tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where relevant) de-energized. This allows maintenance and repair work on the system to be performed safely.

Why is LOTO so important?

Why is LOTO Important? LOTO is a very serious safety practice that helps to provide protection to employees. Equipment and machinery identified for LOTO are capable of unexpected start-ups which may result in the harmful release of hazardous energy.

Can LOTO tags be reused?

Discuss how signs or tags must be readily secured to the controls and how tags are designed so that they cannot be reused, are attachable by hand, self-locking, and non-releasable with a minimum unlocking strength of at least 50 pounds.

Who is allowed to remove a lockout tagout?

Lockout devices must be only be removed by the person who applied them- if several employees are working on the same piece of equipment, the team supervisor must remove their lockout device last.

Is lock out/tag out training required annually?

Yes. While there is no need for annual training, retraining is required to reestablish the LOTO proficiency of an employee, as well as introduce revised or new control procedures and methods (OSHA 29 CFR 1910.147 (c) (7) (iii) (C)).

What are OSHA 6 steps for Lockout Tagout?

Preparation – Lockout/Tagout. The first step of the locking and tagging out equipment or machine etc.

Shut Down – Lockout/Tagout. With the planning complete,the actual or exact process of powering down and locking out machines starts.

Isolation – Lockout/Tagout.

Lockout/Tagout.

Stored Energy Check – Lockout/Tagout.

What to include in lockout tagout procedures?

A steam valve is automatically turned on burning workers who are repairing a downstream connection in the piping.

A jammed conveyor system suddenly releases,crushing a worker who is trying to clear the jam.

Internal wiring on a piece of factory equipment electrically shorts,shocking worker who is repairing the equipment.

How often is lockout tagout training required?

You should also train employees on lockout and tagout whenever: Near misses or accidents occur Your periodic inspects reveal that your Hazardous Energy Control Procedures are not up-to-date, effective, or being used properly.

Who is responsible for the lockout tagout program?

The underlying question, who is responsible for the lockout program, is often asked, when in fact all individuals within the workplace have a responsibility. A manager is responsible for creating the lockout tagout program and documenting all specific energy control procedures.