What is RG-58 cable used for?

RG58 has a distinct impedance of either 50 or 52 ohms. The RG58 cable is prominently used for two-way radio communication systems, such as amateur radio, police radio, marine VHF (Very High Frequency), WLAN (Wireless Local Area Network) antennas and so on.

What is the difference between RG-58 and RG174?

RG58 and RG174 cables are used in vehicle boosters. The difference between the two is the better low-loss quality of the RG58 with cable length up to 20 feet compared to the RG174’s 6 feet. For large vehicles, such as RVs or boats, the RG174 is preferred. Both are fitted with SMA connectors.

Is RG-58 low loss?

Braided CablesRG 58 FME Xtra Low Loss-Cables Procom-designs having the lowest loss possible for RG 58-type coaxial cable: (below 0.3 dB per m at 900 MHz) and a very precise 50 Ω characteristic impedance. The cables are produced under continuous automatic control to ensure the high quality.

What is RG-58 C u?

RG-58/U is a type of coaxial cable often used for low-power signal and RF connections. The cable has a characteristic impedance of either 50 or 52 Ω. “RG” was originally a unit indicator for bulk RF cable in the U.S. military’s Joint Electronics Type Designation System.

What does RG stand for in RG-58?

Radio Guide
RG stands for “Radio Guide” and is a military term. The 58 class has an outer diameter of 0.195 inches, 50 to 53.5 ohms impedance, and can handle up to 500 watts of HF (High Frequency) power. RG58/U has a solid center conductor of 20 AWG bare copper. Its capacitance is 28.5 pF per foot.

Which cable is better RG6 or RG59?

RG6 cables can carry signals at a longer distance and keep better signal quality than RG59 cables. Therefore, RG6 cables are usually used for high-frequency applications like TV connection, while RG59 cables is more suitable for low-frequency and short-distance transmission.

What is the RG-58 cable?

The RG-58 cable is most often used for the Thin Ethernet when the maximum length required is about 185 meters. The RG-58 cable frequently acts as a generic carrier of power signals.

What is a 50 Ω cable used for?

Most two-way radio communication systems, such as marine, CB radio, amateur, police, fire, WLAN antennas etc., are designed to work with a 50 Ω cable. RG-58 cable is often used as a generic carrier of signals in laboratories, combined with BNC connectors that are common on test and measurement equipment such as oscilloscopes .

What is the center conductor of RG-58A/U?

Plain RG-58 cable has a solid center conductor. The RG-58A/U features a flexible 7- or 19-strand center conductor. Most two-way radio communication systems, such as marine, CB radio, amateur, police, fire, WLAN antennas etc., are designed to work with a 50 Ω cable.

What is RG type coaxial cable used for?

Type of coaxial cable. RG-58/U is a type of coaxial cable often used for low-power signal and RF connections. The cable has a characteristic impedance of either 50 or 52 Ω. “RG” was originally a unit indicator for bulk RF cable in the U.S. military’s Joint Electronics Type Designation System.