How do I setup my Belkin wireless router?

General Belkin Router Configuration

1. Visit the router’s IP address (http://192.168.2.1) in a new browser window.
2. Click on DNS under Internet WAN.
3. Enter the router’s password and click Submit.
4. Uncheck Automatic from ISP and type in OpenDNS addresses in DNS Address and Secondary DNS Address.
5. Click Apply Changes.

How do I get my Belkin router to work?

Unplug the modem, the router and the computer (in that order) from their respective power outlets then wait for 30 seconds before plugging them back. Re-plug the modem first followed by the router and then the computers.

How do I reset my Belkin wireless router?

Reset Button

1. Locate the “Reset” button on the Belkin router.
2. Push the “Reset” button and then release it to reset the router.
3. Push the “Reset” button and hold it for at least 10 seconds to start the “Restore to Factory Defaults” process.
4. Release the button after the 10-second minimum.

What is the IP address for Belkin router?

192.168.2.1
NOTE: The default IP address of a Belkin router is 192.168. 2.1. You need to check the IP address range and Default Gateway to assign it to a computer when assigning a static IP address.

How do I open a port on my Belkin f6d4230-4?

The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your Belkin F6D4230-4 router. Navigate to the port forwarding section. Click the Virtual Servers link.

What is the default network name for my Belkin router?

The default setting is “Belkin”� You can set a local domain name (network name) for your network� There is no need to change this setting unless you have a specific advanced need to do so� You can name the network anything you want such as “MY NETWORK”� Enhanced Wireless Router38 table of contentssections1 2 3 4 5 6 7 8 9 10

How do I use the Belkin wireless utility?

Under the “Wireless Network Properties” tab, select a network name from the “Available Networks”… Page 106 2. Once the “Advanced” button is clicked, the Belkin Wireless Utility will appear. This Utility will allow you to manage all the advanced features of the Belkin Wireless Card. 3.

How do I set up a Belkin router without the setup CD?

To set up a Belkin router without using the Setup CD, you need to perform three procedures: Verify the internet connection Connect the devices together Accessing the router’s web-based setup page Verify the internet connection This is to identify if the connection coming from your Internet…