What is the hardness for S45C?
| Physical Properties | Metric | English |
|---|---|---|
| Hardness, Brinell | 201 – 269 | 201 – 269 |
| Hardness, Rockwell C | 13.8 – 27.6 | 13.8 – 27.6 |
| Tensile Strength, Ultimate | 686 MPa | 99600 psi |
| Tensile Strength, Yield | 490 MPa | 71100 psi |
What is the hardness of C45 material?
170 – 210
C45 is generally supplied in an untreated or normalised condition with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210.
What is EN24 material?
What is EN24? EN24 is a 1.5% nickel, 1% chromium, 0.2% molybdenum alloy steel which has a long history dating back over 100 years. EN24 can be heat treated to a wide range of tensile strengths from 850-1000 N/mm² (‘T’ condition) up to 1550 N/mm² (‘Z’ condition).
Is S45C magnetic?
The material of yoke is S45C steel used for structural purposes. Its magnetic property is shown in Fig. 5 and Table I.
Can EN24 be forged?
EN24 is a very popular grade of through-hardening alloy steel, which is readily machinable in the “T” condition. (Refer to our machinability guide)….Chemical composition:
| Grade | Min | Max |
|---|---|---|
| Silicon, Si | 0.10 | 0.35% |
| Nickel, Ni | 1.3 | 1.8 |
| Molybdenum, Mo | 0.20 | 0.35 |
| Chromium,Cr | 0.90 | 1.40% |
Is EN24 a mild steel?
Engineering Steel EN24 is a very high strength steel alloy which is supplied hardened and tempered.
What is the equivalent of s45c in other countries?
Worldwide equivalents of grade S45C (Japan: JIS ) Steel : S45C. Japan. Standard : JIS G4051. Cross reference table. for Steel S45C (JIS ) and its European equivalent C45E (1.1191) ( EN ) EU. EN. USA.
What is sm45c steel?
SMC45 also know as S45C . An unalloyed carbon mechanical strictural steel. SM45C is belongs to KS D3752- 1986 Steel garde stanard. Otai special steel is china supplier and stockholders of SM45C carbon steel in round bar, plate, flat bar, square bar, hexagonal bar. SM45C also can make to seamless steel pipe, welding steel pipe.
What is the maximum temperature after sm45c steel quenching?
After SM45C steel Quenching, heat to 550 ~ 650 °C. As customers requirement, provide normalized; annealing; Quenching+Tempering mechanical properties: ≥|σb/MPa: 570；—；690; ≥|σs/MPa: 345；—；490; ≥|δ (％): 20；—；17