What happens when I load BIOS defaults?

A BIOS reset will erase BIOS settings and return them to the factory defaults. These settings are stored in non-volatile memory on the system board. This will not erase data on the system drives.

How do I enable OS Optimized Defaults?

Solution

1. Restart the PC and press F1 to enter Setup.
2. For ThinkPad: Navigate to the RESTART menu.
3. Select OS Optimized Defaults and change the value to Disabled.
4. Select Yes to continue to disable the OS Optimized Defaults.
5. Press F9 to load Setup Defaults.
6. Select Yes to confirm the loading default configuration.

What does load UEFI BIOS defaults mean?

When the “UEFI defaults have been loaded… ” message appears, that normally means the UEFI/BIOS has been cleared, or a UEFI/BIOS update has just been done.

What are fail safe defaults BIOS?

So Load fail Safe is a situation when the Bios are activated minimal performance parameters operation. He is util when the system is instable and for search origine of problem (drivers or hardware)… Load optimized Defaults when the Bios are activated many more parameters for optimal performance.

Should I load Optimized Defaults in BIOS?

Load optimized Defaults when the Bios are activated many more parameters for optimal performance.

What does Load Optimized Defaults mean?

Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.

Should I load Optimized Defaults?

Should I disable OS Optimized Defaults?

Bottom Line. If you have already installed Windows in Legacy mode, then you want to install Ubuntu in Legacy mode as well. In this case, you should disable OS optimized defaults. Otherwise you may not get the option to boot to Legacy mode, after you reset the UEFI to default for any reason.

What happens if you change UEFI firmware settings?

To enter the UEFI firmware from Windows 10, use these steps: Warning: Changing the wrong firmware settings can prevent your computer from starting correctly. You should only access the motherboard firmware when you have an excellent reason.

How is the CMOS BIOS settings reset?

Steps to clear CMOS using the jumper method In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3. Move the jumper from the default position 1–2 to position 2–3 to clear CMOS. Wait 1–5 minutes then move it back to the default position.

How do I load the default CMOS settings?

Load CMOS Settings 1 Enter CMOS setup. 2 In CMOS setup, look for an option to reset the CMOS values to the default setting… 3 When found and selected, you’ll likely be asked if you’re sure you want to load the defaults. 4 Once the default values are set, make sure to Save and Exit. See More….

How do I reset the CMOS values?

In CMOS setup, look for an option to reset the CMOS values to the default setting or an option to load the fail-safe defaults. With many CMOS setup screens, there is a function key to do this.

How to enter the BIOS or CMOS setup?

How to enter the BIOS or CMOS setup. In CMOS setup, look for an option to reset the CMOS values to the default setting or an option to load the fail-safe defaults. With many CMOS setup screens, there is a function key to do this.

What should I do if the CMOS settings are not working?

If the steps above do not reset the CMOS settings, we suggest removing the CMOS battery, which causes the computer to forget all CMOS settings, including the password. Wait 5 minutes after removing the battery, then put the battery back into the motherboard and turn on the computer.