What is drive jumper settings?
The jumper pins are similar to the pins on the I/O plate on a motherboard. You enable particular settings by placing a jumper shunt onto specific pins—creating an electrical circuit between them. The settings these jumpers enable are hard-coded onto a drive’s programmed printed circuit board.
How do you set a master to jumper?
Set the first hard disk jumper to Master (Cable Select can be used if you set the second hard drive selection to Cable Select). Connect the drive using the Master connector on the primary IDE cable. Set the second hard disk jumper to Slave (Use Cable Select if Cable Select was used on the first HDD).
How do you change jumper positions?
To change the jumper position on a two-pin jumper block Align one of the holes in the bottom of the jumper with one of the pins on the pin block, and then slide the jumper carefully onto that pin only.
When installing a SATA drive the jumpers should be set to?
Four-Pin Seagate SATA Drives
- Locate the jumper block on the back of the Seagate SATA hard drive.
- Place the jumper over the first and second pin on the right to limit the drive’s data transfer to 1.5 Gigabits per second when it is being used in a server or multi-drive desktop with slow hard drives.
What is a jumper circuit?
In a computer, a jumper is a pair of prongs that are electrical contact points set into the computer motherboard or an adapter card . When you set a jumper, you place a plug on the prongs that completes a contact. In effect, the jumper acts as a switch by closing (or opening) an electrical circuit.
Why is my computer not recognizing my WD external hard drive?
If the WD external hard drive shows as unrecognized, go to the driver’s tab and delete/uninstall the driver. Then check out whether the external hard drive shows up in My Computer/My PC or not. If it doesn’t show up, reboot or restart the PC.
How can I get a large quantity of wd5002abys?
Looking for a large quantity of WD5002ABYS? Call us at (800) 821-3354 or Request a Quote below and one of our sales representative will get in touch with you very soon.
What are the specs of a WD blue hard drive?
As an industry-leading hard drive manufacturer, Western Digital stands behind their PC storage solutions with a 2-year limited warranty included with every WD Blue hard drive. DATA SHEET 3.5-INCH PC HARD DRIVES WD Blue™ INTERFACE SATA 6 Gb/s FORM FACTOR 3.5-inch PERFORMANCE CLASS 5400 RPM Class 7200 RPM Class CAPACITIES 500GB to 6TB MODEL NUMBERS
What happened to hard disk jumpers?
Hard disk jumpers where a necessary nuisance in the IDE/ (P-)ATA days. Not having the necessary jumper or not knowing their proper placement made the difference between a functional hard drive and one not getting recognized by the computer. Fortunately, jumpers disappear in the S-ATA age. Well, almost…