What is MX6?

The Mazda MX-6 is a front-engine, front-wheel-drive coupé manufactured and marketed by Mazda from 1987-1997 across two generations. Mechanically identical to the Capella/626 and its hatchback platform mate, the Ford Probe, these cars shared the GD (1988–1992) and GE (1993–1997) platforms.

What does a 6 gas monitor detect?

Gases detected: LEL (methane), LEL (pentane), PID, IR, Cl2, ClO2, CO, CO high, CO/H2 low, CO/H2S, H2, H2S, HCL, HCN, NH3, NO, NO2, O2, PH3, PH3 high, SO2.

What is PID on MX6?

Industrial Scientific MX6 iBrid Gas Monitor – Diffusion, PID (Photoionization Detector) Get ready to see hazardous levels of oxygen, toxic and combustible gas, and volatile organic compounds (VOCs) like never before.

Is Mazda MX-6 a good car?

The MX-6 is largely reliable, but there are a few minor niggles worth looking into. The air-conditioning system is not the most durable and has been known to leak into the passenger footwell. Check the carpet for signs of mould or damp and blast the air-con up to full on a test drive.

Do gas leak detectors work?

When properly used, gas leak detectors can be an accurate way to determine the presence of natural gas, methane, carbon monoxide, or other gases. However, keep in mind that some models require calibration or have varying degrees of sensitivity.

How much is a Mazda mx6 worth?

How much is a 1993 Mazda MX-6 worth? The value of a used 1993 Mazda MX-6 ranges from $240 to $1,111, based on vehicle condition, mileage, and options.

What is the MX6 ibrid®?

The MX6 iBrid® is more than an intelligent hybrid of Industrial Scientific’s best monitoring technologies—it’s the most adaptable six-gas monitor on the market.

How many gases can the MX6 ibrid detect?

The MX6 iBrid can detect up to six gases simultaneously using a mix of Industrial Scientific’s best monitoring technologies. As your work changes, so does the MX6 iBrid. You can eliminate the need for multiple monitors with hundreds of sensor combinations you can easily change in the field.

How much pressure can the MX6 ibrid with pump sustain?

As a general rule, the MX6 iBrid with pump is rated to sustain a continuous sample draw for up to 100 feet with 0.125-inch inside diameter sample tubing. However, the pump will provide adequate flow at 0.5 liters per minute up to a vacuum pressure of approximately 30 inches of H2O.

Is the DSX docking station for MX6 ibrid right for You?

Keep safe in hazardous conditions with the DSX Docking Station for MX6 iBrid. The docking station maintains gas detectors to simplify routine maintenance like bump tests and calibrations. Talk to one of our experts to learn if the MX6 iBrid is right for you. How many gases can the MX6 iBrid detect simultaneously?