Can you put a locker in a Dana 35?

Can you put a locker in a Dana 35?

The good news is that a Dana 35c can be upgraded with either a Super 35 kit or a C-Clip Eliminator Kit from Superior Axle which will make it strong enough to run both 35″ tires and a locker on pretty tough trails.

Will a Dana 35 Locker fit a Dana 44?

As long as both the axles have the same gear ratio all will be fine. and a Tj dana 44 will bolt in just fine.

What is a Jeep lunchbox locker?

The lunchbox locker is designed to split power evenly between both wheels regardless of which wheel has traction. But, it has to remain open in normal driving situations to allow for the differential to work properly.

What gear ratio does a Dana 35 have?

The Dana 35 is used extensively in the Jeep models. This axle had a GAWR up to 2700 lbs….Available Gear Ratios.

Ratio:1 Pinion:Ring Teeth
3.07 14:43
3.08 13:40
3.31 13:43
3.54 13:46

How do you tell if you have a Dana 35 or 44?

The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape. A Dana 35 (left) compared to a Dana 44 (right).

Are lunchbox lockers noisy?

Lunchbox lockers make a very loud ratcheting sound when they’re cornering. They also have a tendency to unexpectedly lock and unlock. They’ll randomly lock and unlock because of how we corner in vehicles.

What is the spline count of a Dana 35 ox lock?

Dana 35 OX Lockers are designed for 3.55 and numerically higher gear ratios and are offered in (27 spline factory spline count) and 30 spline for aftermarket axle shaft upgrades.

Will a lock-rite fit a 35c rear axle?

I had a Lock-Rite in a YJ with a 35c rear axle and 32″ tires for 2 years and didn’t have any problems with it. At the end of the 2 years I did have a bent axle shaft, but I think that was more due to the 32″ tires than the locker.

Will A Dana 44 bolt up to a TJ Dana 44?

As long as both the axles have the same gear ratio all will be fine. and a Tj dana 44 will bolt in just fine.

What is the difference between a Model 35 and Model 44 differential?

Unlike other performance axles, our Model 35 performance axles use the same spline count (27) as the stock axle thus eliminating the need to replace the stock differential with an aftermarket locker or a Model 44 differential thereby reducing the overall cost significantly.