How do I reset my CADD Prizm pump?
To reset the reservoir volume without changing the cassette/tubing: • Make sure the pump is stopped • Press “NEXT” to display the reservoir volume screen. Press “ENTER” • If message on the screen reads RESET RESERVIOR TO ____? ML, press “Y” or the “up arrow” keypad. 10.
What do you do when your IV pump is beeping?
To resolve: Push the run/pause button to silence the alarm. Gently press on the top of the cassette (top of pump) Push the run/pause button again to restart the pump.
How do you unlock a CADD Prizm pump?
- Stop the pump.
- Close all tubing clamps.
- If necessary, use key to unlock used cassette.
- Use side of key or coin to unlatch used cassette.
- Disconnect tubing from patient.
- Remove and discard used cassette.
What is CADD pump?
With a pain pump, you give yourself medicine to control and relieve your pain. At this time, the pain pump we use is called a CADD pump. CADD stands for Continuous Ambulatory Delivery Device. How does it work? The pump contains a cassette with the pain medicine and is a little bigger and heavier than a smartphone.
How do you prime a CADD pump?
The pump will prompt you to begin priming by asking “Prime Tubing?” Open clamp on pump tubing and press Y key. Press and hold Y key until pump tubing is fully primed. If the key is released and you are not finished priming, press and hold Y key until priming is complete.
Why would an IV pump alarm?
A pump can beep for various reasons. Most frequently the alarm will sound if the line is occluded, meaning it is pinched off or there is air backed up in the cassette. The two most common infusion alarms you’ll find are Occluded – Patient Side, and Air-in-Line.
Can you drive with a pain pump?
You may drive as soon as it is comfortable to do so. You should not drive while under the influence of pain medications. Limited bending or twisting of the spine is advised.
What is the CADD-Prizm PCS II pump?
2 CADD-Prizm PCS II pump ® Delivery Modes PCA Delivery Profile The CADD‑Prizm PCS II pump provides The PCA (patient‑controlled analgesia) ® measured drug therapy to patients.
How does the CADD-Prizm work?
The CADD‑Prizm opposite sides of the tubing. One transducer ® PCS II pump automatically detects the presence acts as an acoustic transmitter and the other of the air detector and will automatically turn as an acoustic receiver.
How many tests are there on the CADD-Prizm PCS II?
24 Air Detector Test (If Applicable) 24 Occlusion Tests 26 Accuracy Testing 28 Cleaning And Functional Testing Checklist CADD-Prizm PCS II Ambulatory Infusion Pump
What is the time base of the CADD-Prizm PCS II?
5 Theory of Operation Keyboard Circuitry Time Base Circuitry The CADD‑Prizm PCS II pump is controlled An accurate 3.6864 MHz timebase is provided ® by a microprocessor. The actions of the by a quartz crystal.