Does the NZXT h440 come with fans?

Like many other modern cases, it eschews 5.25-inch slots for a simple, clean facade. That means there’s no space for fan controllers or optical drives, but maximises space for other components. Remove the front panel, and you’ll find three 120mm NZXT fans have been installed by default.

Does NZXT cam control fan speed?

CAM is only able to control fan speeds via a compatible NZXT fan controller. Devices such as the Smart Device V2, RGB & Fan Controller, Grid V3, Kraken X2 Coolers, Kraken Z3 Coolers, and any of our NZXT N7 Motherboards can control fan speeds for devices connected to them.

Where do I connect NZXT control hub?

The fan controller hub is mounted about the middle of the case. It has 4 output ports on each side, a power connection point at the bottom centre, and a connector to the mobo fan header at top left.

Does NZXT need fan controller?

Q: Do I need an NZXT controller in order to use my RGB fans? A: For RGB power, yes, but for fan power, you can use anything that supports a standard 4 pin PWM fan.

Where do NZXT Case fans plug in?

SOME fans come with TWO connectors on their wires – one FEMALE with 4 holes, plus one MALE with three pins. The FEMALE one is supposed to plug into a mobo fan (male) header. The MALE connector on the fan wires is just so you can connect another fan to that, making a “daisy chain”.

Can NZXT CAM control case fans?

Do you need fan controller for NZXT fans?

Do I need RGB hub for NZXT fans?

Keep in mind these coolers are only compatible with other NZXT RGB products. That being said, you do not need a separate RGB controller for these Krakens.

Do Case Fans need to be plugged into the motherboard?

If you want to have your mobo measure the speeds of your case fans, you must plug them into the mobo ports so that the Speed Pulse signals from the fan motors can be sent back to the mobo on Pin 3 of each port. But interestingly, CONTROL of fan speed does NOT link to this signal.

Does NZXT CAM need Kraken?

Our Kraken coolers do require CAM in order to fully operate properly, this is for a few reasons. All functions that CAM can handle, such as RGB effects, pump control, or fan control.