How do I fix 64GB flash drive only showing 32GB?

How to Fix The 64GB flash drive Only Showing 32GB Problem?

1. Right-click the 64GB USB drive/SD card/memory stick and choose Advanced> Convert to NTFS.
2. Click OK.
3. Select Apply to convert FAT32 to NTFS without losing data.
4. Pitch on the 64GB USB flash drive/SD card/memory stick, select Resize Partition.

Why is my flash drive not showing full capacity?

If your USB drive is shown with a wrong size on your computer, it’s likely the result of an improper formatting of the drive. Instead of seeing the actual 16GB or whatever the size of your USB drive is, you’ll see something like a couple hundred MBs available on it.

Why is my 128GB USB showing 32GB?

Check with disk management as often there is just unallocated space not being used and you keep formatting the small partition. If disk management sees the entire drive the delete all the existing partitions and then create a new one using the full capacity.

Why does 64gb USB only show 57gb?

Most operating systems have a mb = 1024 kb when calculating space. There may also be “file system overhead” that doesn’t show up as “usable space”. This is space the file system needs to set aside to properly index where files are stored on the drive. So having 59–60gb usable space on a 64gb drive, is about right.

How do I restore my flash drive to its full capacity?

How to restore USB drive back to full capacity

1. Select the USB drive to format. Connect the USB drive or pen drive to your computer.
2. Set the drive letter and file system on USB.
3. Check “OK” to confirm formatting USB.
4. Apply the changes.

Can I format 64GB flash drive to FAT32?

Due to the limitation of FAT32, the Windows system doesn’t support creating a FAT32 partition on a more than 32GB disk partition. As a result, you cannot directly format a 64GB memory card nor USB flash drive to FAT32.

How do I format a 64GB USB exFAT to FAT32?

How do I convert my 64GB USB to FAT32?

1. Connect the USB flash drive to your PC.
2. Open File Explorer.
3. Right-click on the USB flash drive, select “Format”.
4. Select “FAT32” as the file system.
5. Press the OK button to begin the conversion process.

How do I restore my flash drive to full capacity?

Why 64GB USB/SD card only showing 32GB?

Why 64GB USB/SD card Only Showing 32GB? It is better to find out why 64GB USB drive only shows 32GB before trying to fix this issue. The reasons can be various, but mainly include: The USB drive is used to create a Windows installation drive or a recovery drive (like the scenario above).

What is the file system of a 64GB USB flash drive?

The file system of the 64GB flash drive is changed to FAT32 not NTFS. As you know, the Disk Management can format an external hard drive to FAT32 up to 32GB, that’s why you can’t get a partition larger than 32GB. The USB drive is divided into two or more partitions.

How to fix 64GB flash drive only showing 32GB?

Click Apply at the tool bar to fix 64GB flash drive only showing 32GB. After a while, you will get a whole 64GB partition on USB flash drive/SD card/memory stick to fully use. In other words, you will restore the USB flash disk back to full capacity.

Why can’t i format a 64GB flash drive to fat?

This USB flash drive is used to create a Windows installation or a recovery disk. The file system of your USB drive is FAT32 not NTFS. Disk Management can only allow you to format an external hard drive to FAT up to 32GB. So, that’s why you can’t format a 64GB flash drive to FAT.