What is free cutting brass?
360 Free Machining Brass (Free Cutting Brass), also called out as (CDA C36000) is a soft, ductile metal that machines quite easily. It is utilized in general screw machine applications as well as high volume production.
What is brass alloy 360?
360 brass—also referred to as free-machining brass—is a copper-zinc alloy known for having the highest machinability among all of the copper alloys and exceptional strength and corrosion resistance. Below, we provide an overview of the key properties and typical applications of this material.
What is the hardness of 360 brass?
Brass 360 Characteristics
| TEMPER | Yield Strength | Brinell Hardness (500kg/10mm) |
|---|---|---|
| Soft Annealed | 20 | 63 |
| 1/2 Hard | 25 | 102 |
| Hard | 39 | 126 |
Are there different grades of brass?
There are over 60 types of brass, the most basic categorisation can be considered to group all brasses into three main families, copper zinc brasses (Cu-Zn), Leaded brasses (Cu, Zn, Pb) and tin brasses (Cu, Zn, Sn) these can then be further sub-divided by their more specific properties and uses.
What is brass alloy 260?
260 brass—also referred to as cartridge brass, yellow brass, and 70/30 brass—is a copper-zinc alloy with a distinct shiny, yellow appearance.
What is brass 360 H02?
Brass Rectangle/Flat Bar 360-H02 Extruded is normally used in ornamental, manufacturing, industrial, hardware, electrical, structural, automotive, and construction applications. 360 brass has good strength and corrosion resistance, and is extremely easy to machine.
What is the strongest type of brass?
alpha-beta brass
More common than alpha brass, alpha-beta brass is both harder and stronger and has a lower cold ductility, than alpha brass. Alpha-beta brass is cheaper due to the higher zinc content, but more susceptible to dezincification corrosion.
How can you tell the quality of brass?
You can tell the difference with the help of a magnet. If you hold a magnet against the item and feel a pull, you know the piece is brass plated. If there’s no attraction, then the piece is solid brass. That’s because the underlying metal is usually iron or steel, both of which are magnetic.