What is DensArmor plus?
DensArmor Plus® Interior Panels, which feature fiberglass mats instead of the paper facings used on the surface of traditional gypsum board products, resist mould growth. They’re ideal for areas prone to high humidity such as basements and residential bathrooms, and are ideal for commercial installations.
What is DensArmor drywall?
A mold-resistant interior gypsum wallboard formulated for high-traffic commercial areas. DensArmor Plus® Fireguard® Abuse-Resistant Interior Panel is the first fiberglass mat abuse-resistant panel designed as a replacement for paper-faced panels in commercial building interiors.
How do you finish DensArmor plus?
The finishing and sanding of DensArmor Plus® Interior Panels should be performed in accordance with the most current version of Gypsum Association Publication GA-214 “Recommended Levels of Gypsum Board Finish.” Joints between DensArmor Plus panels may be finished with either paper tape embedded with all-purpose joint …
Can you use DensGlass on the interior?
Interior Walls DensGlass® Shaftliner is a 1inch / 25mm gypsum panel used in fire-rated shaftwall, stairwell, mechanical duct, and residential area-separation-wall assemblies.
Is DensArmor plus waterproof?
DensArmor Plus panels are GreenGuard Indoor Air Quality Certified® and have been listed as microbial resistant by the GreenGuard Environmental Institute. StoGuard® is a waterproof air barrier assembly that protects backup construction (sheathing and CMU) from moisture intrusion and air leakage.
Is DensArmor plus fire rated?
DensArmor Plus Fireguard exhibits 15 flame spread as tested per ASTM E 84 or CAN/ULC S-102. A specially formulated gypsum core that includes glass fibers allows DensArmor Plus Fireguard to help protect framing members and prevent or delay the spread of fire.
Can you put stucco on DensGlass?
Stucco systems may be applied over DensGlass Sheathing using paper-backed metal lath or two layers of building paper and metal lath. Metal lath must be mechanically attached through the DensGlass Sheathing into the steel or wood framing.
Can DensGlass get wet?
DensGlass® Sheathing is an engineered exterior gypsum sheathing. It has a specially treated gypsum core and embedded fiberglass mats on both sides for superior moisture, fire and mold resistance. This product can remain exposed for up to twelve months and is an ideal substrate for a wide variety of exterior claddings.
Can you screw into DensGlass?
Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing.
Can DensGlass be left exposed?
Providing superb protection from the elements, DensGlass Sheathing is resistant to delamination and deterioration due to weather exposure — even during construction delays that last as long as twelve months after installation and are backed by a limited warranty against delamination and deterioration for up to 12 …
Can densarmor plus panels be installed in pre-rock conditions?
•When using DensArmor Plus panels in a horizontal position, such as a ceiling, they should not be installed in pre-rock conditions if water can pond or settle on the panels. •DensArmor Plus panels are not intended for roof applications.
What is the difference between densarmor plus® interiors and paper-faced drywall?
DensArmor Plus®Interior Panels have fiberglass mats for superior mold and moisture resistance compared to paper-faced drywall.
Is densarmor panel mold resistant?
Moisture- and mold-resistant 1, DensArmor Plus Abuse-Resistant Panel is formulated for high traffic areas such as corridors in hospitals, schools and other public buildings. This tested, abuse-resistant, interior drywall resists abrasions, gouging, indentation, scrapes and bumps that can mar traditional drywall.
What are the components of a densarmor plus Fireguard?
Components: 1” (25.4 mm) DensGlass Shaftliner panel, C-T or C-H studs and two layers of 5/8” (15.9 mm) DensArmor Plus®Fireguard or DensArmor Plus Fireguard C panels installed horizontally for base layer and vertically for face layer.