How do I install Plantronics?

How do I install Plantronics?

How to Install and Set Up Plantronics Software

  1. Install a compatible softphone.
  2. In the softphone application, select the Plantronics headset as the default audio device.
  3. Open the Plantronics Control Panel.
  4. The Devices tab lists compatible Plantronics headsets which are installed in the computer:

How do I update my Plantronics headset?

To update your headset:

  1. Connect your headset to its USB charging cable or place the headset in the optional desktop charge stand.
  2. Choose Voyager Legend, and then click Get Started.
  3. Click Continue.
  4. Click Continue again.
  5. Personalize any of your settings, if desired.
  6. Click Update Your Headset.
  7. Click Update.

How do I pair my Plantronics headset to my phone?

To pair the headset,

  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on. The light on the headset should start flashing an alternating red-blue.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
  4. If prompted for a passkey, enter 0000 (four zeros).

How do I update the firmware on my Plantronics Voyager focus?

Go to http://www.plantronics.com/myheadset-updater. Choose Voyager Pro HD, and then click Get Started. Plug your headset into your computer using your USB charging cable, and then click Continue.

How do I pair my Plantronics PLT?

Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”

How do I connect my Plantronics headset to my laptop Windows 10?

Power the headset on and when the indicator light flashes red and blue, release the call control button. Turn the Universal Adapter on. Press and hold the adapter pairing/connect button for 7-10 seconds. When adapter starts flashing red and blue release the buttons.

How to setup Plantronics wireless headset to auto answer?

Voyager Focus UC Firmware Release Notes

  • Voyager Focus UC Troubleshooting: Media Unmutes During Call
  • Voyager Focus UC Date Code Location
  • Voyager Focus UC Product Information
  • Voyager Focus UC Troubleshooting: Transmit/Receive Audio Not Routing to Headset
  • Voyager Focus UC: How to Pair to a Mobile Device
  • Voyager Focus UC Spares and Accessories

    • How to install Plantronics?

    Plantronics CS500 Installation Video (3 minutes): Step 1: Charge the CS540 Headset for 20 Minutes. Take the AC Power Supply adapter and plug one end into your wall outlet or power strip. The other end will plug into the back of the CS540 base, as shown in the following picture. Place the headset into the base.

    Which Plantronics headset is right for You?

    The best Plantronics Wireless Headset that we’ve tested is the Plantronics Voyager 5200 Bluetooth Headset. This Bluetooth mono headset has a comfortable design that should be comfortable enough to wear for extended periods. It’s stable and shouldn’t move around or slip out of your ear even when you’re on the go.

    How to pair Plantronics Bluetooth headset with Windows 10?

    Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.

  • Put your headphones in pair mode.
  • Put your Bluetooth USB adapter into pair mode by gently pressing and holding the pair button with a pen or paperclip until the Bluetooth USB adapter flashes red and blue.