What can I substitute for bar and chain oil?

6 Chainsaw Bar & Chain Oil Alternatives

Table of Contents

Vegetable Oil. Vegetable oil is one of the safest alternatives available to oil your chainsaw.
Canola Oil. Similar to vegetable oil, canola oil is another super-safe alternative.
Motor Oil.
Hydraulic Fluid (Diluted)
Drained Motor Oil (Diluted)
Drained Hydraulic Fluids (Diluted)

Can I use motor oil instead of bar and chain oil?

If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.

Can I use 10w30 for chainsaw bar oil?

As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.

Can I use 5w30 for chainsaw bar?

Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.

Can I use 5w 30 for bar oil?

What weight of oil is chainsaw bar oil?

30W
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.

Can I use engine oil for chainsaw chain?

Some people caution against using motor oil on a chain saw, but not for safety reasons or concerns about equipment. Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer.

Can I use 5w 20 for chainsaw bar oil?

They are 5w20 and 10w30, which would be best? You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden!

Can you use 2 stroke oil as bar oil?

Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.