What is HP SAN switch?

What is HP SAN switch?

The HP 8/24 SAN Switch delivers affordable and flexible 8 Gb/s connectivity and can be incorporated into an extensive core fabric or placed as an edge switch for SAN environments.

How do I access my HP SAN switch?

HP StorageWorks 8GB SAN Switch – Configuring the SAN Switch for Use in a Network

  1. Obtain required items.
  2. Power on the 8Gb SAN Switch.
  3. Make a serial connection.
  4. Power on the switch.
  5. Set the switch IP address.
  6. DHCP.
  7. Setting a static IP address.
  8. Set the switch date and time.

How do I turn off my HP SAN switch?

Procedure

  1. Connect to the switch and log in using an account assigned to the admin role.
  2. Enter the sysShutdown command.
  3. Enter y at the prompt.
  4. switch:admin> sysshutdown.
  5. This command will shutdown the operating systems on your switch.
  6. You are required to power-cycle the switch in order to restore operation.

How do I backup my HP SAN switch?

Re: HP StorageWorks 4/16 SAN Switch how to backup you can access the switch administrator by the webinterface. Click the “show advanced mode” button an navigate to “configure”. On the bottom of the screen you will find a tab with the name “Upload/ Download”. The zoning is included in this file.

How do I reset my SAN switch password?

Re: Recover/reset password on 8/8 SAN switch?

  1. Start system.
  2. Recover password.
  3. Enter command shell. Option?
  4. At the “>” prompt.
  5. Using the value for OSLoader, run the boot command.
  6. At the command prompt run the following commands to reset the passwords.
  7. Reboot the switch, interrupt boot agin.

How do you set up a Brocade SAN switch?

Connecting to the CLI

  1. Connect the workstation to the Ethernet network containing the HPE Synergy Frame Link Module.
  2. Connect to the switch using ssh or open a Telnet connection using the IP address set earlier.
  3. Enter the user name, using an administrative account.
  4. Enter the password.
  5. Verify the login was successful.

How do I assign an IP address to a SAN switch?

  1. Connect to the switch and log in using an account with admin permissions.
  2. Enter the ipAddrSet -ls command. • To add an IPv4 address, use the–add parameter. Specify the network information in dotted-decimal notation for the.
  3. Enter the ipaddrshow command to verify the result.

How do I turn off HP Storageworks?

To shut the storage system down, perform the following steps:

  1. Start HP Command View EVA.
  2. Select the appropriate storage system in the Navigation pane.
  3. Click System options.
  4. Click Shut down.
  5. Under System Shutdown click Power Down.
  6. Turn off the power switch on the rear of each HSV controller.

How do I turn off my Brocade SAN switch?

To power off all of the SAN switches, do the following steps for each SAN switch:

  1. Log in to the HMC command-line interface as the hscroot user.
  2. Connect to the SAN switch with ssh and log in using an account assigned to the administrator role.
  3. Enter the sysshutdown command.
  4. Enter y at the prompt.

How do I backup my SAN switch settings?

Answer

  1. switch:admin> configupload.
  2. Protocol (scp, ftp, sftp, local) [ftp]:local.
  3. File Name [config.txt]: config.txt.
  4. switch:admin> configlist -local.

How do you save configuration on Brocade SAN switch?

The configuration file contains all zoning information and configuration settings of fabric.

  1. To take backup of configuration file first login into Switch by using admin account.
  2. Give configupload command.
  3. It will ask you host details in which server you want to save the configuration file.

What is the default root password for Brocade switches?

The default password of “admin” is “password”. The OS of brocade switch uses Linux 2.6 kernel. The root is super administrator account.