How do I connect my Epson L355 to WiFi?
Setup automatically by using a push button
- 1 Hold down the [WPS] button on the access point (wireless router) until the security light flashes.
- 2 Press the [Wi-Fi] button on the printer until the light and the light flash alternately (approximately 3 seconds).
- 3 Wait until the process ends.
How do I reset my Epson L355 WiFi?
Press the power button to turn off your product. Press and hold the network status button and press the power button to turn your product back on. The network settings are restored to their factory defaults and your product turns on.
Why is my WiFi light blinking on my Epson printer?
The printer is turned on. The printer is busy. Wait for the power light to stop flashing before turning off the printer. The printer is connected to the wireless network….Printer Light Status.
| Lights | |
|---|---|
| 3 | maintenance box |
| 4 | paper |
| 5 | ink out |
Where is reset button on Epson L355?
To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero. The process should be instant and you should immediately see a dialog box popping up.
How do I setup my Epson l355?
How do I reset my Epson L4150 Wi-Fi?
Reset the Wi-Fi on Epson L3150, L4150, L355, XP201, XP2101 printer
- First, turn on the Epson equipment.
- Then press and hold the network status button and simultaneously press the power button until the Wi-Fi and Wi-Fi Direct lights start to flash alternately.
- Next, release the two buttons.
How do I disconnect my Epson printer from Wi-Fi?
Disabling Wi-Fi Features
- Press the home button, if necessary.
- Select Setup.
- Select Network Settings.
- Select Wi-Fi Setup. You see this screen:
- Scroll down and select Disable Wi-Fi.
- Select Yes to disable Wi-Fi.
Why is there a red light on my Epson printer?
Reason Behind Epson Printer Red Light Blinking Error The primary cause of this issue is the faulty filling of ink in the cartridges. The red light alludes to the wrong filling of ink. It could also mean that the ink levels are low or the printer doesn’t recognize the cartridges.
Why is the WiFi flashing on my printer?
The Wireless light blinks when the printer is attempting to connect to the wireless router or access point. Wait a few minutes, and then check the light again. If the printer establishes a connection, you can stop troubleshooting.
How do I reset my Epson L355 ink?
Process
- Turn the printer off.
- Leave printer off for at least 10 seconds.
- Press and hold the Stop/Resume button.
- Press and release the Power button.
- When the Power button stops flashing, release the Stop/Resume button for 1 second.
- Press and hold the Stop/Resume button for 10 seconds.