What is the best temperature to seal a blacktop driveway?

Pavement sealers are best applied when the temperatures are a MINIMUM of 55 degrees and RISING and do not fall below 50 degrees for 48 hours after application. This allows ample cure time for the pavement coating.

What temperature should you seal your driveway?

What’s the best temperature to seal a driveway? The ideal conditions for application are during the day when pavement and ambient temperatures are at least 50°F and rising, and no rain is forecasted for 24 hours. If these recommendations are not followed, the procedure will not yield desired results.

Can you seal a driveway in cold weather?

Colder temperatures and driveway sealcoating do not generally get along. If it is below 50 degrees, the sealer won’t adhere to the surface of your asphalt driveway and will quickly wear off. Driveways that have been sealed in cold weather are more prone to fading, cracking, and potholing.

What time of year is best to seal driveway?

Ideally the best time of year for driveway sealcoating is between May and October. However, you will want to check the forecast to be as sure it will not rain while the driveway is setting. It is important to not touch or drive on the seal coated driveway for at least 12 hours.

What if it rains after sealcoating driveway?

Will Rain Ruin a Freshly Sealed Driveway? Rain and other precipitation will ruin the hard work you put into sealing your driveway. Rain will wash away driveway sealer, resulting in an uneven or nonexistent coat of sealant.

How long should you stay off driveway after sealing?

During the summer months of May through August we recommend staying off the driveway with vehicles for 48 hours. After September 1st allow 72 hours or more depending on the temperature. Driveway sealer will dry like paint from the top down. It may feel dry on the surface but may still be wet underneath.

How long does it take for tar to dry on driveway?

Asphalt takes six to twelve months to fully cure, and remains a little more susceptible to damage for that time. However, it takes 48 to 72 hours to “dry” enough for foot and vehicle traffic.

Can you put two coats of driveway sealer on?

Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.