What is the electrical code for GFCI outlets?
GFCI protection is required on dwelling unit outdoor outlets* supplied by single‐phase branch circuits rated 150‐volts or less to ground, and 50‐amperes or less. NEC 210.8(F) is only applicable to readily accessible outdoor equipment outlets.
Where are GFCI outlets required NEC?
Per 210.8, you must install GFCI protection for all 15A and 20A, 125V receptacles located in bathrooms, rooftops, and kitchens in commercial/industrial facilities. However, GFCI protection is not required for receptacles installed outside a commercial or industrial occupancy.
How many outlets can GFCI protect NEC?
There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.
What is code for GFCI outlets in kitchen?
Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. Also, the receptacle supplying a dishwasher should be GFCI-protected.
Can I use 15 amp GFCI in kitchen?
Requirement: All 15 amp and 20 amp outlets, whether GFCI or not, must be tamper-resistant in the following kitchen-related places: small appliance circuit, countertop space (including island countertops), wall, and hallway space.
Are GFCI required in garage?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
Does a refrigerator need a GFCI?
Residential Kitchen In a dwelling unit (residential), GFCI protection is only required for kitchen receptacles that serve the countertop surfaces. There’s no requirement to GFCI protect receptacles that serve a refrigerator. Unless the fridge is plugged into a countertop receptacle.
Can you have 2 GFCI outlets on the same circuit?
When you need to wire multiple GFCI outlets such as in a kitchen or bathroom you have a couple of options. To save money, you can put in a single GFCI and then wire additional standard outlets to the “LOAD” output from the single GFCI. This provides the same protection as having a GFCI at each location.
Can you put 2 GFCI outlets in series?
You only need 1 GFCI outlet per circuit (assuming it’s at the beginning of the line and the rest of the outlets are loads). They are correctly wired in parallel – if they were in series, you wouldn’t get the correct voltage at the other outlets when there is any type of load present.
Should refrigerator be on GFCI?
A refrigerator shouldn’t be plugged into a GFCI outlet. GFCI outlets are used in areas of the home with water or moisture. These include bathrooms, basements, and kitchens. This type of outlet is important because it reduces the risk of electrocution and electrical fires.
How do I know if I need a 15 or 20 amp GFCI?
Do you? Kitchens and bathrooms should always have 20 amp gfci outlets. However, you must be using number 12 wire for 20 amp gfci or regular outlets If your wiring is number 14 guage then use a 15 amp. So, the wire size and breaker size together should be rated for 20 amps!
Do I need 15 amp or 20 amp GFCI?
The amp rating of the receptacle and circuit do not depend on whether the receptacle is a GFCI or not: If you have a 15 amp circuit, you must have 15 amp receptacles. If you have a 20 amp circuit, you can either have 20 amp receptacles, or 15 amp receptacles if there is more than one (e.g. a duplex receptacle).
Should all outlets be GFCI?
Kitchens – All receptacles located near major appliances and the sink should be of the GFCI variety. As a rule of thumb, any outlet within four feet of the sink should be a GFCI outlet. One may also ask, how many outlets can 1 GFCI protect?
What are GFCI outlets and where should they be installed?
– Spaces at or below grade level – Areas where heating, AC and refrigeration equipment is installed – Includes 120-volt lighting outlets
How to select a GFCI outlet?
UL or ETL Certification. Like any crucial household device,GFCI outlets are much better when they’re vouched for their quality and safety features by reliable safety companies.
How to install a GFCI outlet?
To install the GFCI outlet without ground, follow the below mentioned steps: Turn off the electric supply of your home from the main breaker. Identify the white “neutral “wire in the breaker box and the black “hot “wire. Simply connect the line side black and white wires of the breaker to the line side wires of GFCI and load side black