How do I reset my spectralink 8440?

While the phone is booting cancel the startup process by pressing the “Cancel” soft key. Once you see the “Welcome!” countdown screen, press and hold 1 3 5 all at the same time. Enter the phone’s MAC address as the reset password, and the phone will be restored to factory defaults.

How do I reset my spectralink?

You can restart the Spectralink DECT Server 2500/8000 and reset password to default by pressing the Reset button (using a paper clip) on the CPU card. The CPU card resides to the far left side of the cabinet.

How do I forward my spectralink 8440 phone?

Forward the call to another number by pressing the Forward soft key and entering the extension number. See Forwarding an Incoming Call on page 15. The Mute soft key appears during active calls. Press this key to mute the microphone.

How do I factory reset my spectralink phone?

Reset to Factory Default Settings

1. Press the Menu/Home Key.
2. Select Settings.
3. Select Advanced. The Password will depend on the profile:
4. Select Administration Settings.
5. Select Reset to Defaults.
6. Select Reset to Factory.
7. Select Yes for Are you Sure.
8. The Phone will reboot twice and it can then be provisioned.

How do I reprogram my Polycom phone?

Procedure

1. Press the Menu/Home Key.
2. Select Settings.
3. Select Advanced. The Password will depend on the profile:
4. Select Administration Settings.
5. Select Reset to Defaults.
6. Select Reset to Factory.
7. Select Yes for Are you Sure.
8. The Phone will reboot twice and it can then be provisioned.

How do I reset my Polycom admin password?

To restore phone to factory defaults with the Admin Password:

1. Power cycle the phone.
2. Press Cancel soft key during the boot process.
3. During the countdown, press and hold the following dial pad keys simultaneously until the password prompt appears:
4. Enter the administrator password to initiate the reset.
5. Press OK.

What happens if I factory reset my Polycom phone?

Performing a factory reset on third-party Polycom deskphone reverts its settings back to factory-default, and deletes all stored information.

How do I reset my Polycom voicemail password?

How do I change my voicemail password using my Polycom phone?

1. Log in to the voicemail by dialing *86 or press the Message key.
2. Enter your password.
3. Press *
4. Press 8 to change the password.
5. Enter and confirm the new password.