What does the Varitone switch do?
Introduced by Gibson in 1959, the Varitone 6-way tone control is a circuit that acts as a notch filter, reducing frequencies at set points along the frequency spectrum. Filtering is achieved by passing the signal through capacitors that effectively remove or reduce specific frequencies.
What does the switch do on a bass?
A few basses may have a pickup selector switch. A 3-way pickup selector switch has 3 settings: both pickups on, the bridge pickup on, or the neck pickup on. Having one volume knob, two volume knobs, or a switch basically give you all the same options.
What is the switch on a bass guitar?
The switch selects active or passive electronics circuits; passive in the down position (toward the neck) and active in the up position. The adjacent inset control wheels are active treble cut and active bass cut, and they function only when the switch is in the up (active) position.
What are the 4 knobs on my bass guitar?
Bass guitars with two pickups and four knobs usually have a master volume control, blend control (to adjust the emphasis of the bridge or neck pickup), bass control and treble control.
What is Phat EQ?
According to Ibanez, the Phat II EQ circuit provides an “active bass boost” which “offers additional low-end power.” The Phat II EQ came as a standard feature on my black GSR205 when I purchased it in 2006.
What do the 5 knobs on a bass do?
There are only two types of knobs on a bass: volume and tone. Depending on your bass, the volume knobs can be divided into Master volume, pickup blend, and individual pickup volume. Tone knobs are used for low-end (bass), mid-range, and high-end (treble). Most basses have 2-5 knobs.
What do the knobs on a Fender bass do?
The modern Fender Jazz bass has three basic controls. The knob closest to the neck controls the volume of the neck pickup (warmer tone.) The knob closest to the bridge pickup controls the volume of the bridge pickup (brighter tone.) The knob closest to the input jack adjusts the master tone of both pickups.