How do you reset a Kenmore 790 oven?

On most Kenmore ranges that begin with model number 790. . ., you have to press and hold the STOP/CLEAR button for 3 deliberate seconds to unlock the oven door. Try pressing and holding that button for at least 5 deliberate seconds and see if the oven door will unlock.

Table of Contents

Why won’t my Kenmore stove heat up?

A common cause for your Kenmore oven not turning on or heating is a malfunctioning bake element. The bake element is a heating element that is located at the oven bottom. Commonly, wires that power the bake element can become burned out and will need to be replaced.

Does my Kenmore oven have a fuse?

All Kenmore wall ovens have a thermal fuse that protects the wall oven from excessive heating, but if the fuse blows, the oven won’t heat. If your fuse does blow, once you spot the Kenmore stove fuse location, then you can replace it.

Why is my stove not heating up?

An oven that won’t heat is usually the result of a faulty igniter (for a gas oven) or heating element (for an electric oven). If both your gas oven and your gas burners have stopped working, the problem is most likely with the gas line, and will require professional repair.

What are the error codes on a Kenmore 790 range?

These error code explanations can help diagnose a problem on a Kenmore freestanding range with a model number that starts with 790 and whose error codes have 4 digits, such as F001 or F090.

What to do if the Kenmore 790 door lock motor doesn’t run?

If the door lock motor doesn’t run, disconnect power to the range and check the wire harness connections between the door lock assembly and the relay control board. Kenmore 790 Model 4-digit Range Error Codes | Sears

What to do if your Kenmore range keeps resetting error codes?

If the code resumes after restoring power, unplug the range and check the resistance through the oven temperature sensor from the electronic oven control board using a multimeter. Kenmore 790 Model Self-cleaning Range Error Codes | Sears

Why won’t the door lock on my Kenmore gas oven work?

Try again to lock the oven door by initiating the Oven Lockout or starting a Clean Cycle. If the door lock motor doesn’t run, disconnect power to the range and check the wire harness connections between the door lock assembly and the relay control board.