What ports does NetBackup use?
NetBackup versions 7.0 primarily use the VERITAS_PBX (1556) and VNETD (13724) ports. NetBackup 7.0. 1 and newer servers first attempt to connect to VERITAS_PBX.
What protocol does NetBackup use?
TCP protocol
NetBackup primarily uses the TCP protocol to communicate between processes. The processes can run on the same host or on different hosts.
Is port 1556 TCP or UDP?
Port 1556 Details
| Port(s) | Protocol | Source |
|---|---|---|
| 1556 | tcp,udp | SG |
| 1556 | tcp,udp | SANS |
| 1556 | tcp | IANA |
| 1556 | tcp,udp | IANA |
What port is BPCD?
This property specifies the port that the NetBackup client uses to communicate with the NetBackup server. The default is 13782.
What is Openv?
Solution. The /usr/openv/netbackup/hardlink_info directory is used on each client to facilitate the restarting of incomplete checkpoint backups.
What port does PBX use?
PBX Admin Access
| PORT | TCP/UDP | NOTES |
|---|---|---|
| 22 | TCP | Port used to allow SSH to the PBX from the outside world. |
| 80 FreePBX 2001 PBXact | TCP | Used to access the PBX Admin GUI |
| 443 | TCP | Used to access the PBX Admin GUI with SSL encryption |
| 1194 | UDP | Used to connect OpenVPN clients to PBX VPN Server. |
What is BP conf file in Netbackup?
Enables the NetBackup busy file-processing feature. By default, this entry is not present in the client’s /usr/openv/netbackup/bp. conf file.
What is Openv Netbackup?
What is RTP port?
Real-Time Transport Protocol (RTP) The Real-time Transport Protocol is a network protocol used to deliver streaming audio and video media over the internet, thereby enabling the Voice Over Internet Protocol (VoIP).
Kubernetes cluster to/from the NetBackup primary server typically requires TCP port 443. Review the Kubernetes configuration to ensure this has not been changed to a non-default port; often 6443 or 8443. Backup host to the MongoDB workload node requires TCP port 22 (ssh).
What is NetBackup access control (NBAC)?
NetBackup Access Control (NBAC) has been integrated with NetBackup and the processes nbatd and nbazd will be used in place of vxatd and vxazd. These processes are registered with PBX for inbound connections via the PBX port 1556, removing the need to have ports open to the VxSS server.
What is the ACS configuration on NetBackup media servers?
The ACS configuration must be matched by the configuration in the vm.conf file on NetBackup media servers. ACS_SSI_INET_PORT defines destination ports inbound to the media server from the ACS host.
How do I configure Network Address Translation (NAT) on NetBackup?
The Network Address Translation (NAT) feature requires that NetBackup client hosts – typically located behind a NAT gateway – be able to connect to the message queue broker (MQBroker) on the master server. By default, the MQBroker is listening on TCP port 13781. This port number can be changed using the configureMQ command.