What size hose does dust Deputy use?
1″ to 3″
The standard Dust Deputy cyclones are designed for use with ports/hose that are 1″ to 3″ in diameter.
How do you ground a Oneida Dust Deputy?
Apply conductive metal tape as shown here. For added grounding, attach a self-supplied wire with a ring terminal on one end and a washer tied to the other end when installing one of the bolts. The wire must be long enough for the washer to lie flat on the floor.
What is a Thien baffle?
An alternative form of cyclone is what is known as a ” Thien-baffle”. In a Thien-baffle, the air spirals in a flat shape from the edge to the center, whereas in a cyclone it moves in more of a helical pattern down the cone and then back up the middle.
How tall is dust deputy?
What is the height of the Dust Deputy using single bucket, no casters, floor to top of elbow? It is 30.75″ to the very top of the tapered elbow fitting on the Dust Deputy Deluxe (with a single bucket and no casters).
What does a dust deputy do?
Tired of paying for expensive vacuum filters and dust bags? Our patented Dust Deputy® cyclone separator removes over 99% of dust and debris from the incoming airstream, eliminating filter clogging and suction loss!
Which is better cyclone or Thien baffle?
Efficiency Ratings: Thien Baffle: 439 CFM/837 CFM = 52% (or 48% loss of airflow) Cyclone: 634 CFM/837 CFM = 76% (or 24% loss of airflow)
What is the warranty on the Oneida dust deputy?
Oneida Air Systems®, Inc. (OAS) warrants the Dust Deputy for a period of 1 year, to the original purchaser from the date of purchase, unless otherwise specified. Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All
What are the dimensions of the Oneida air 3 system?
oneidaair.com 3 System Dimensions 13-1/4″ 337 mm 28-7/8″ 733 mm 25 -1/4″ 641 mm 9-5/8″ 244 mm 8″ 203 mm Nominal dimensions shown. Dimensions subject to slight
What are the dimensions of the dust?
SOME DUSTS ARE HIGHLY FLAMMABLE OR EXPLOSIVE. LEARN/ KNOW WHAT YOU ARE DEALING WITH. FOLLOW ALL LOCAL, STATE, FEDERAL & NFPA CODES AND GUIDELINES. oneidaair.com 3 System Dimensions 13-1/4″ 337 mm 28-7/8″ 733 mm 25 -1/4″ 641 mm 9-5/8″ 244 mm 8″ 203 mm Nominal dimensions shown.
What size vacuum can the dust deputy be used with?
The Dust Deputy can be used with any make, model, or size wet/ dry vacuum with an inlet ranging from 1.5″ to 2.5″ in size. We recommend that it has an airflow rating of at least 50 CFM to ensure optimum dust separation performance. The elbows that come with the Dust Deputy Deluxe Kit measure out to an ID of 2.25″ and an OD.