What is one benefit of the Aironet 4800 AP?

The Aironet 4800 expands the current rich capabilities of our current Aironet portfolio (with features such as built-in Flexible Radio Assignment, Hyperlocation, and Bluetooth Low Energy [BLE]) and adds a fourth internal radio to provide rich performance and location and security analytics.

Table of Contents

How to factory reset cisco 4800 AP?

Reset Cisco Wireless AP to factory defaults

Connect the console cable.
Unplug the power or network cable if connected to a POE switch.
Press and hold the Mode button.
Plug the power back into the AP.
Wait until the output on the console says button is pressed.

How do you convert autonomous AP to lightweight AP?

Autonomous to Lightweight conversion (CLI and TFTP)

Step 1: Download the CAPWAP (or LWAPP if your AP does not support CAPWAP) file matching your access point model from Cisco.com.
Step 2: Prepare the AP for TFTP code upload.
Step 3: Transfer Lightweight recovery image to the AP using TFTP.

What is difference between lightweight and autonomous access point?

Autonomous Access Points This is where the access point and switch for wireless traffic are combined. The controller in the WLAN is what distinguishes it from lightweight access points. As the name autonomous implies, the controller allows the single device to manage traffic independently from any additional support.

How do you convert autonomous to lightweight?

Access points that are converted to lightweight mode must get an IP address and discover the switch using DHCP, DNS, or IP subnet broadcast. You can convert autonomous Cisco Aironet access points to lightweight mode.

What is the difference between CAPWAP and Lwapp?

CAPWAP is based on the Lightweight Access Point Protocol (LWAPP)….Differences from LWAPP.

Feature	LWAPP	CAPWAP
Data plane encryption	No	Optional, depending on hardware; 5500s only.
Fragmentation and reassembly	IP fragmentation	CAPWAP fragmentation
MTU discovery	No	Yes
Protocol control ports	12222	5246