What size is chip and saw timber?
8”-11”
In general, the size of pine logs fall into the following categories: trees that are 5”-7” diameter at breast height (DBH) are considered “pulpwood;” logs that are 8”-11” are considered “chip-n-saw;” logs that are 12”+ in diameter are considered “sawtimber.” As logs get larger, the per-ton value of the trees increases; …
What size is saw timber?
Sawtimber tree. Softwoods must be at least 9.0 inches d.b.h. and hardwoods must be at least 11.0 inches d.b.h.
What size is pine sawtimber?
Pine sawtimber trees are used to cut dimension lumber (2”x 4”s, 2”x 6”s, 2”x 8”s, 2x 10”s, 2”x 12”s, 4”x 4”s, and 4”x 6”s in 8, 10, 12, 14, and 16 feet lengths). Pine chip-n-saw (CNS) trees have no visual defects, are relatively straight, and have dbh of 9 to 13 inches.
What is Chip-n-saw used for?
Chip-n-Saw Logs are sent to the sawmill where the outer layer is ground away. Larger logs are slabbed and sawn to create 2x4s and other small dimension lumber. Smaller logs in the load are chipped for fuel or paper pulp.
What is the size tree needed for timber?
In most cases, properties 20 acres and larger are an ideal size for logging timber (again, depending also on the quantity, size, and types of the trees on the property). This is, of course, just a ballpark number.
What is chip saw wood?
Chip-n-saw means pine sawtimber having a minimum top (diameter inside bark) equal to or greater than ***. Chip-n-saw means sawtimber consisting of southern yellow pine that meets the minimum specifications for chip-n-saw as described in Annex A, MeadWestvaco Southern Wood Product Sawtimber Specifications.
What is the difference between pulpwood and sawtimber?
Pine pulpwood trees are generally trees with poor form, cankers, forks less than 17 feet high and a DBH of 5 to 9 inches. Pine chip-n-saw (dimension lumber and chips) trees generally have a DBH between 9 to 13 inches and have good form. Pine sawtimber trees have a DBH greater than 13 inches and also have good form.
What size is pulpwood?
Pulpwood is typically a small tree measuring 6-9” diameter breast height (DBH). Pulpwood trees are chipped into small chunks, chemically treated, and made into paper. Pulpwood is measured by weight in tons or by volume in standard cords.
How many trees can I plant in one acre?
On average you can expect to plant anywhere from 300-800 trees per acre. Now, this number can be increased or decreased depending on conditions being provided in the area. Some of these include access to water, nutrients, sunlight, and species you are planting.