How do you use a cool start remote starter?
Compatible Vehicles
- Turn Ignition Key to the ON position.
- Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times.
- Press the start button of the first transmitter. You should get 1 light flash confirming the remote is coded, then.
How do I use my crimestopper remote start?
1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation. (Chirps can be programmed on or off-See installation manual.) 2) Parking lights flash once, then turn on solid, Ignition/Accessory circuits turn on.
How do I reset my remote car starter?
Press the Lock button on your remote car starter. Within five seconds of turning it on, turn your key back to the “off” position (or press the start button again). Repeat the on-off cycle three more times—you’ll do four in total.
How do I Turn on coolstart on a diesel engine?
Connect a 2-pole momentary switch with one side to chassis Ground and the other side to the Green input wire. If you own a turbo or turbo diesel vehicle, you can now allow the CoolStart system to keep your engine running for 1-5 minutes after exiting/locking your vehicle to cool-down without the need for an external Turbo Timer.
How many programmable control options does coolstart have?
OPTION PROGRAMMING This CoolStart unit has over 23 programmable control options to customize the system for various operating features and installer preferences. Examine the chart on the pages 16-17 along with reading the descriptions that follow on pages 18- 20. You may change one option at a time, or program multiple options in one session.
What is smart tachless mode on coolstart?
Your CoolStart system includes a unique voltage monitor called “Smart Tachless” mode. This mode allows this unit to efficiently start an engine without the use of a tach signal wire. These modules actively monitor the voltage level of the vehicle to control the starter motor each time a remote start is requested.
Can I use coolstart without a turbo timer?
If you own a turbo or turbo diesel vehicle, you can now allow the CoolStart system to keep your engine running for 1-5 minutes after exiting/locking your vehicle to cool-down without the need for an external Turbo Timer. NOTE: The turbo timer button will also trigger a remote start if it is inadvertently pressed when the vehicle is not running.