What do the lights on my Plusnet router mean?
Blue- your hub is connected to the internet and working fine. Orange – your hub is receiving a broadband signal but can’t connect to the internet. No light- the hub is likely to be unplugged or turned off. Red – There’s a problem somewhere in your setup.
How do you fix Technicolor router if there is a red light showing?
Restart your router. Unplug your modem/router from power, wait at least 30 seconds, then plug it back in. Wait while the lights cycle, and see if the red light goes away. Check your connections.
How do I reset my Technicolor router?
Whilst your router is turned on, carefully push a thin object into the reset hole on the rear of the unit until the power light turns off, then release the button. The unit will reboot and attempt to contact our servers to download its last known good configuration.
Why is my Plusnet router green?
Re: Plusnet Hub One Constant Green Light Based on the information you’ve given it’s likely that the router has developed a fault. I’ve requested a new router is sent out to you with a returns bag for the faulty one.
Why does my Plusnet router keep flashing orange?
An orange flashing wireless light indicates that the WPS button has been pressed.
What does red light on Asus router mean?
Asus Router Red Light: Meaning Generally, the red light on your router indicates that the internet signal can’t be detected and the router can’t connect to the ISP.
What do lights mean on router?
Internet (White / Amber) – The Internet LED is solid white when connected to the Internet. It blinks white while the router works to establish a connection. A solid amber LED indicates the connection is down due to configuration issues. Amber blinking indicates that the connection is down due to hardware issues.
How do you troubleshoot a Technicolor modem?
Troubleshooting Technicolor Set Top Box
- Power down and unplug your equipment (TV, modem, and router) for approximately five minutes and then power back up.
- If you are watching a video over a wireless connection, connect your device directly to your router/modem with an ethernet cable.
Why is my Plusnet hub not working?
If you can’t connect, try restarting your hub If you think there’s an issue with your connection, it’s a good idea to try switching your hub off and back on again to see if it helps restore service. Wait five minutes or so after powering it back up and recheck the connection.
How can i Improve my Plusnet Wi-Fi signal?
Manage your hub, change your Wi-Fi settings and find out what your Plusnet router lights mean. Check our general guide to find out the best place to put your router to improve your Wi-Fi signal.
What does the Internet light on the PPP mean?
No, the Internet light is designated to indicate the status of the PPP session. Off when nothing is up, red when authentication fails and green when online. It does also blink to indicate data transfer across the PPP session. If this problem is continuing after a reboot (even if it takes a while), we can arrange a replacement unit to be sent.
Does the red light on the internet switch make a difference?
It makes no difference. What I have noticed is that the “internet” light is permanently on when the red light is on – does this mean that its trying to get something from plusnet, and not getting it, and thus chewing up bandwidth? 04-07-2012 9:03 AM