What is a PATS Control Function Module?
The PATS control module compares the received key code and validates or rejects the key code. If the key code is correct, the PATS control module sends a signal to the PCM to enable the fuel pump and injectors. During this period, the PATS security warning light is illuminated.
What is a Ford PATS module?
Passive Anti-Theft Systems (PATS), also called Ford Securilock, is a vehicle security feature introduced on 1996 and later Ford vehicles. When replacing the Powertrain Control Module (PCM) on a PATS-equipped vehicle, a parameter reset or relearn procedure must be performed after the PCM is installed.
Can you bypass PATS system?
Not only professionals can bypass the pats system, but also normal humans can do so. The only requirement is the transponder key used to deceive the system so that it believes that there is no theft-taking place in the vehicle.
What does the Ford PATS system disable?
In all vehicles, it disables the injectors. In certain vehicles, it also disables the starter. If the THEFT light is fast-flashing during your starting attempt, its a PATS event.
How do I bypass Ford anti-theft system?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
Does my Ford have Pats?
PATS began in 1998. That being said, if your truck was manufactured in late 1997 it’s possible it might have been built with PATS. If your ignition key is just a plain metal key, you don’t have PATS. PATS used an RF transponder key with a rather large plastic grip.
Does the Pats system disable fuel pump?
Yes, it disables the fuel pump.
How do I reset my Ford Pats?
Cycle a key in ignition to RUN. Enter Security Access on the PATS control function module. Select “Parameter Reset” and then Exit Security Access. Perform a PCM Keep Alive Memory (KAM) reset.
How do I know if I have Pats?
How does a Pats module work?
The PATS module communicates Generates an “exciter” field that powers the chip in the key, which then transmits encoded data back to the transceiver. The key contains a spool of wire that converts the “field” to power to run the chip, so the key never needs battery replacement.
What are the different types of Ford Pats control?
Like any electronic system, Ford has gone through several variations on the PATS system. There are five variations of PATS in use on Ford vehicles. Systems are identified as types A, B, C, D, E, F and G . The PATS control is a stand alone module. When you turn the key to RUN/START, the theft warning light turns on for 2-seconds.
What is Ford Pats passive antitheft system?
Ford PATS Passive Antitheft System uses a key with a transponder in the head of the key. Each transponder is coded with a unique identifying code made from a possible 18 billion combinations. It’s a passive system because it doesn’t require any input from the driver.
Where is the Pats module located on a Ford?
Over the years, Ford has located the PATS module in different places; • In some vehicles, it’s built into the instrument cluster • On some models it’s a separate module. • On some late model vehicles, the PATS module is located behind the steering column shroud and contains an antenna connected to a small electronics module.