How do you enter the EKA code on a Range Rover P38?

Range Rover P38 EKA Code

1. Using the ignition key insert it into the drivers door lock.
2. Turn the key anticlockwise to the locking position and back to the central position 4 times.

How do I enter EKA code?

Land Rover Freelander EKA code (emergency key access) Start with the car “locked”, make sure it is locked and leave it for a minute. Turn the key in the drivers door to the UNLOCK (clockwise) position ONCE the red LED alarm / immobiliser light will go out the engine will now start.

How do I reset my Land Rover Discovery Immobiliser?

Insert the key into the drivers door lock and turn to the lock position. Wait for 5 seconds. Turn the key to the unlock position the number of times indicated by the first digit of the EKA code. Turn the key to the lock position the number of times indicated by the second digit of the EKA code.

How do I get my Land Rover EKA code?

The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob.

How do I reprogram my Land Rover key fob?

How to Program a Key Fob for a Range Rover

1. Stand outside of the Range Rover with all of the doors of the vehicle closed. On the integrated remote fob and key unit, hold down the “Lock” button continuously.
2. Continue to keep the “Lock” button of the fob held down. Rotate the key clockwise in the door lock.

How do I reset my car immobilizer?

Hold the panic button for five seconds to reset the immobilizer. Then press the lock button twice and wait ten meters from the car for ten minutes.

How do I reset my discovery Sport radio?

How do I perform a reset, when my screen is blank?

1. To reset the device, simultaneously press the Power on and Volume up button for 10 – 12 seconds.
2. The device will power down and then automatically reboot.
3. Device will now power on, perform and charge as expected.

How do you unlock the EKA key on a keypad?

start by turning the key to lock (to left, anticlockwise) and return to centre 4 times. the 1st digit of EKA by turning to unlock and returning to centre by the number of digits, and so on.

How do you enter the EKA code on a Ford Explorer?

Turn key LEFT from upright position to LOCKED position and back to upright FOUR times. Then and only then can you input the EKA code. If the code is say 1234, turn key from upright to RIGHT once and back to upright. Turn key LEFT and back to upright TWICE. Then from upright to RIGHT and back to upright THREE times.

How do I enter the EKA code on a 1999 Kia Optima?

For a 1999 and on vehicle the entry of the EKA code MUST start with all doors closed. Turn key LEFT from upright position to LOCKED position and back to upright FOUR times.

How to sync out of sync Key with Eka lockout?

You cannot sync an out of sync key when EKA lockout is active. It needs the EKA code entering then you can sync the key. Put key in drivers door move slowly and carefully fully to the left and back to upright 4 times. If your EKA code was 2424 you then carefully twist key fully to right and back to upright twice.