How do I mount an E-ZPass in NY?
Adhere the tag inside your vehicle to the upper center portion of your windshield, behind the rear view mirror at least one inch to the right of the center support of the mirror and at least one inch below the edge of the windshield, or below the tinted section of glass.
How do I get mounting strips for E-ZPass?
More. Need new adhesive strips? They’re FREE! Request them at www.e-zpassny.com or call 1-800-333-TOLL (8655).
Where is the best place to mount your E-ZPass?
Locate the correct position for the tag — the upper center portion of your windshield behind the rearview mirror, at least 1 inch to the right of the mirror and at least 1 inch below the top edge of the windshield.
How do I get more Velcro for EZ Pass NY?
Need new adhesive strips? They’re FREE! Request them at e-zpassny.com or call 1-800-333-TOLL (8655).
Can EZ Pass be mounted on black dots?
“You only want to mount it on the clear glass. So if you have the roofline tint that goes on the top of the windshield, or dotted tint near the rearview mirror, you don’t want to put it on top of that,” says Transurban spokesman Mike McGurk.
Where is the validation code on EZ Pass NY?
The validation code is an 8-digit code that contains both numbers and letters. It is located on the back of the transponder in between the mounting strips. Enter or repeat your validation code on the phone or online to complete the activation process.
What is an E-ZPass read Prevention bag?
Read-prevention bags — the manufacturer calls them static bags — are just that. Take the E-ZPass tag off the windshield, drop it in the bag, pay cash at the toll booth and go your merry way, safe from Richard Gere’s prying eyes.
Can I put 407 transponder on dashboard?
I throw mine on the dash when using it. Just put it beside the plastic thing, it doesn’t need to be in the middle. I attached mine to the left of my dashcam.
Can I spray paint my E-ZPass black?
Not having the EZ Pass affixed creates safety issues at the toll plaza and the possibility of fines. You can paint yours black but it is messy and still leaves the attachment strips quite visible.
What is the black dotted area on my windshield?
They use those black enamel outside the windshield to block the sun’s ultraviolet rays from melting the adhesive underneath the band. This keeps the windows firmly glued in their place. Third, the black dots, or “dot matrix” actually help distribute temperature evenly to lessen optical distortion or “lensing”.
What is the alphanumeric code on EZ Pass NY?
How to mount or install an EZ Pass correctly?
– The toll rates that are being deducted from your account are higher than they should be based on your enrolled discount plans – You have received a Notice of Tolls Due (NOTD) – You have received an “Invalid Tag” message on the patron display
How to install EZPass NY?
– Clean placement area on inside of windshield with isopropyl (rubbing alcohol) and allow to dry. – Remove plastic tape from back of Velcro™ mounting strips on tags. – Position tag as illustrated below based on your mirror type. – Press tags firmly against the windshield glass.
Where to get an EZ Pass NY?
– Stop at a participating retailer and purchase a prepackaged $25 Tag – Visit the E-ZPass® website to Register your Tag * online or call 1-800-697-1554 – Attach the Tag to the windshield and start saving
How to buy NY EZ Pass?
E-ZPass On-the-Go allows busy travelers to open an E-ZPass account without filling out an application or waiting in line. Customers can purchase an E-ZPass tag at a retail location, register the tag and enjoy the time and money savings E-ZPass offers. It’s E-Z! Ready. Customers can stop at a participating retailer in NY State, excluding New