How do you calibrate Smart UPS?
Business Edition – Click on the name of your UPS, then select Diagnostics. Under “Initiate Diagnostics” select “Calibration” from the dropdown and click apply. Network Management Card – From the “Tests” menu select “UPS”. Select “Runtime Calibration” and click “Apply”.
How do you calibrate a Smart Battery?
To maintain accuracy, a smart battery should periodically be calibrated by running the pack down in the device until “Low Battery” appears and then apply a recharge. The full discharge sets the discharge flag and the full charge establishes the charge flag.
How do I enable APC Smart UPS 1000?
SC, SU, and SUA Smart-UPS require a functional battery be connected in order to turn on….To perform a cold start:
- Unplug the Smart-UPS from the wall.
- Press and hold the power button (labeled I/Test on SU and SUA units)
- Let go of the button during the long beep.
- UPS will cycle through a self test and come up on battery.
How do I reset APC UPS 1100?
APC Smart UPS – How to reset / restart
- Turn off and unplug UPS from wall.
- Press and hold the OFF button again.
- You may see a quick flash of the LED’s and you should hear an audible “”click”” from the UPS.
- Turn UPS back on.
Does battery Calibration really work?
Calibrating the battery won’t give you longer battery life, but it will give you more accurate estimates of how much battery power your device has left.
How do I calibrate my Smart-UPS?
User Commanded: This is the preferred method for all Smart-UPS except for models beginning with SU (IE: SU700NET). Calibration is initiated from Power Chute Business Edition, the Network Management Card, or the LCD Screen of the UPS (if so equipped). Ensure that the normal load is attached
How do I calibrate my APC ups?
Follow these steps to do a proper manual calibration on your APC UPS: 1. Battery must be at 100% capacity when the Runtime Calibration is initiated/started. (charge the UPS for 24hours prior) 2. The UPS must have 30-34% load on it during the calibration (Constant load, try: lamps, computers, monitors.
What is the runtime of the ups after calibration?
This runtime will vary depending on the load attached, the battery charge, and the age of the batteries. Performing a calibration forces the UPS on battery, drains the battery down, and charges it back up.
How often should I calibrate the battery of my ups?
Please keep in mind that the runtime reported while the UPS is online is only an estimate. The runtime reported when the UPS is on battery power is more accurate. Due to increased wear and tear on the battery we recommend performing a calibration no more than once every 6 months (if needed).