How can I tell which NTP server my client is synchronized with?

How can I tell which NTP server my client is synchronized with?

To verify the NTP server list:

  1. Hold the windows key and press X to bring up the Power User menu.
  2. Select Command Prompt.
  3. In the command prompt window, enter w32tm /query /peers.
  4. Check that an entry is shown for each of the servers listed above.

How do I check my NTP status?

To verify that your NTP configuration is working properly, run the following:

  1. Use the ntpstat command to view the status of the NTP service on the instance. [ec2-user ~]$ ntpstat.
  2. (Optional) You can use the ntpq -p command to see a list of peers known to the NTP server and a summary of their state.


NTP is a built-on UDP, where port 123 is used for NTP server communication and NTP clients use port 1023 (for example, a desktop). Unfortunately, like many legacy protocols, NTP suffers from security issues.

How to set up a NTP server in Windows 2008?

You can setup a Windows 2008 server R2 as a NTP server and a NTP client. You should modify register entries to achive your goal (start>run>regedit) SYSTEM\\CurrentControlSet\\services\\W32time\\Parameters\\NtpServer = (This will allow the NTP Server to synchronize with, if you don’t need that you can let it empty)

What is NTP synchronization Windows Server 2008 r2100?

16 November, 2009Microsoft, Windows Server 2008, Windows Server 2008 R2100 NTP synchronization is an important aspect for all computers on the network. By default, the clients computers get their time from a Domain Controller and the Domain Controller gets his time from the domain’s PDC Operation Master.

How to check external NTP servers in time configuration?

You can check the external NTP servers in the time configuration by typing: C:>w32tm /query /configuration Check the Event Viewer for any errors. Tested on Windows Server 2008 R2 (Build 7600). Cheers! – Marek.Z Be Sociable, Share! Click to share on Twitter (Opens in new window) Click to share on Facebook (Opens in new window)

What is the number of Peers in NTP pool?

#Peers: 4 Peer: State: Active Time Remaining: 17.2309002s Mode: 1 (Symmetric Active) Stratum: 3 (secondary reference – syncd by (S)NTP) PeerPoll Interval: 6 (64s) HostPoll Interval: 6 (64s) Peer: