How do I change the battery in my Mini Cooper key fob?

1. Remove the integrated key from the remote control (see image for step 1)
2. Slide the integrated key into the opening and raise the cover. The battery compartment is accessible.
3. Slide the integrated key in the cover of.
4. Push battery in the direction of the arrow using a pointed object and lift it out.

Where is the hood release on a MINI Cooper?

One of the easiest ways to open your MINI Cooper hood is from the inside of the vehicle. Down on the driver’s side, to the left of the pedals, there should be a lever. Pull it up once to unlock the hood, then again to open it. Once you step outside the car, you may notice the hood is just slightly open.

Can you start a MINI Cooper without a fob?

MINI Cooper Comfort Access MINI Cooper’s comfort access system lets the owner open the car door and start the engine without having to touch the key at all. All you have to do is to have the key somewhere on you or near you.

How do you start a MINI Cooper without a key fob?

Press start/stop to stop engine. Remove keyfob. Wait 1sec, depress clutch and press start/stop (within 10sec) to start engine.

How do you open the boot on a Mini Cooper?

This is configurable in the settings. One press on the fob unlocks the drivers door, two presses unlocks all doors. If the car is locked and you only want in the boot a press and hold of the boot open button will pop open the boot, all other doors remain locked.

How to program the key for a Mini Cooper?

I would recommended that you ensure all key fobs are fitted with new batteries. ( Click here to see battery replacement guide).

Get in the car and close the drivers side door.

Put the key into the ignition and turn to position I.

Wait 5 seconds

Turn the key quickly to position II then back to I four times.

You should hear a single chime.

Remove the Key

How to program a keyless remote on a Mini Cooper?

How to Program a Keyless Remote on a Mini Cooper Two-button KeysSit in the driver’s seat of the vehicle. Make sure all the doors are closed and both keys are with you. Press and hold the ‘Unlock’ button on the first key while pressing the center ‘Lock’ button three times.

How to program a Mini Cooper ignition key?

Insert the key into the car’s ignition and start the engine. Leave the car’s engine on for no longer then 10 seconds.

Turn the engine off but do not remove the key from the ignition.

Press button “1” within 10 seconds of turning the car’s engine off.

Press button “2” immediately after pressing the first button.

How to reset a Mini Cooper Key?

press key LOCK button 3 times within 10 seconds WHILE keeping UNLOCK button depressed. System should lock and unlock car to indicate programming has been sucessful. A maximum of 4 keys can be programmed. The keys only usually reset themselves because the cars battery has been taken out for a while, or has been allowed to go flat.