How do I turn off the SRS light on my Acura?

How do I turn off the SRS light on my Acura?

To reset the SRS light on the Acura TL you need to turn the key to on, wait for the air bag light to come on. Once it does wait 7 seconds for it to go off then turn the car to off. Now repeat this two more times and it will reset.

What does the SRS light mean on a Acura RSX?

The car’s onboard computer will turn on the Supplemental Restraint System (SRS) Warning Light if the system will not operate properly or operate outside of intentions. This system is designed to deploy air bags and tighten seat belts when the computer determines the car is in an accident.

What does SRS fuse stand for?

When you see the Supplemental Restraint Systems (SRS) light illuminated on the control panel of your Vehicles it means there is a problem with the airbags or the seatbelt tensioners.

Is it safe to drive with the SRS light on?

So is it safe to drive with an SRS light on? The answer would be no, Even though there’s a possibility that the airbags could still deploy with the light on it is a huge risk if one were ever involved in an accident. We recommend having a professional look at it and diagnose the issue to have fixed immediately.

How do I reset my Acura RSX?

How To Reset Acura RSX Maint Req’d Light in Seconds!

  1. Turn the ignition switch to the OFF (0) position.
  2. Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
  3. Hold the button(s) for 10 seconds or until the indicator resets.

What is SRS light on Acura?

The Airbag (SRS) warning light may illuminate due to one or more failed sensors. Our technicians recommend complete diagnoses of any stored fault codes because these sensors can be very expensive to replace.

Can you pass emissions with SRS light on?

While you shouldn’t be happy about the fact that your SRS light is on (in fact, you should be worried), the good news is that there is nothing that will prevent you from passing your emission test if your only concern is your airbag light.

How do you reset the check engine light on a Acura RSX?

Turn off the engine, press and hold on the “reset” button on the instrument cluster, turn on (no engine running) the ignition switch, hold it for as long as possible, and then release the button when it has been reset to standard settings.

Does the SRS system have a fuse?

Your car likely has a fuse for the Secondary Restraint System (SRS) or airbag. In most car models, this will be fuse #40 on the fuse block. Removing this fuse may or may not disable the airbag. Apart from the airbag, the pre-tensioners in the seat belts are also connected to the SRS fuse.