How does a NDIR sensor work?

NDIR CO2 sensors monitor and detect for the presence of carbon dioxide based on the absorption of infrared light at a specific wavelength. An NDIR sensor comprises an infrared source, a light tube, a bandpass filter, and a detector. The target gas is determined through the filter wavelength choice.

Table of Contents

What is NDIR gas sensor?

An NDIR gas sensor (nondispersive infrared sensors) is a simple spectroscopic device often used as gas detector. It is called nondispersive because the wavelength which passes through the sampling chamber is not pre-filtered. Instead a narrow bandpass (or NBP) filter is used before the detector.

What is a refrigerant sensor?

Refrigerant sensors from smartGAS reduce operating costs and protect the environment. Refrigeration and air conditioning systems are used in many areas: in supermarkets and industrial enterprises (commercial refrigeration), as well as hotels, office buildings and large refrigerated warehouses.

What is the most important sensor in a gas monitor?

The majority of sensors today are catalytic pellistors , semi-conductor and thermal conductivity for combustible gases, electrochemical for toxic and oxygen. Infrared have become more widely used for CH4 and CO2 today and PID for VOC’s but the bulk of the sensors are catalytic and electrochemical.

How many CO2 sensors do I need?

Number of CO2 sensors to install? You must place sensors in all the rooms you want to control. One sensor per room up to 50m2.

What is the purpose of a CO2 sensor?

CO2 Sensors are used to measure the levels of carbon dioxide (CO2). It is important to monitor this gas as it is an indicator of CO2 emission levels, ventilation quality and combustion industrial processes.

What is NDIR spectroscopy?

Nondispersive infrared (NDIR) spectroscopy is often used to detect gas and measure the concentration of carbon oxides (for example, carbon monoxide and carbon dioxide). An infrared beam passes through the sampling chamber, and each gas component in the sample absorbs some particular frequency of infrared.

What is non dispersive IR spectroscopy?

Abstract. Non-dispersive infrared (NDIR) spectroscopy analyzes the concentration of target gases based on their characteristic infrared absorption. In conventional NDIR gas sensors, an infrared detector has to pair with a bandpass filter to select the target gas.

Will a refrigerant leak detector work for natural gas?

A detector such as the Informant 2 Refrigerant & Combustible Gas Leak Detector (available from SupplyHouse) will alert homeowners to the presence of airborne refrigerant gas so they can leave the immediate area and call a plumber.

Are gas sensors accurate?

Accuracy: Typically listed with a plus or minus 5 percent, it is associated with a confidence interval of 95 percent. This means in 95 out of 100 results; the readings should be within plus or minus 5 percent of the actual gas concentration.

What is the NDIR CO2 sensor?

This NDIR Co2 sensor is a small size, common type sensor, NDIR principle to sense the presence of CO2 gas in the air. This NDIR Co2 sensor provides good selectivity, long life and non-oxygen dependent. This MH-Z14A NDIR Co2 sensor module comes with built-in temperature compensation.

What is NDIR spectroscopy used for?

What is smartgas NDIR broadband refrigerant sensor?

smartGAS’ new NDIR Broadband refrigerant sensors from smartGAS provide a flexible solution for measuring multiple gases in one set-up. The broadband refrigerant sensor is calibrated to 2000 ppm R134a, but is also great for measuring R125, R404a, R407a and R410a.

What is the cut-off frequency of NDIR sensor?

C f 2 (5) So the overall circuit acts as a second order low-pass filter. In addition the internal resistance of the thermopile of the NDIR sensor (generally hundreds of kΩ) can be used to make an additional low-pass filter. It is recommended to use a cut-off frequency close to f1 and f2.