How much does a 16ft jon boat weigh?
10 Example Jon Boat Weights
| Jon Boat Model | Average Weight |
|---|---|
| Lowe L1436 | 185 pounds (84 kg) |
| Crestliner 1600 | 275 pounds (125 kg) |
| Alumacraft 16 Foot Jon Boat | 320 pounds (145 kg) |
| Crestliner 1800 | 475 pounds (215 kg) |
How much weight can a 16 ft jon boat hold?
At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs. At 20+ feet in length a jon boat is able to hold up to 1,900 lbs of people and equipment.
How much does a 16 Alumacraft boat weight?
POWER BOATS
| POWER BOATS | Length | Weight (lbs) |
|---|---|---|
| 1648 | 16′ | 320 |
| 1648 NCS | 16′ | 320 |
| CLASSIC 165 CS | 16′ | 895 |
| CLASSIC 165 TILLER | 16′ | 895 |
How much does a 16 foot boat trailer weigh?
In addition to the gear and fuel, there is room for up to 5 people with a maximum weight of 827 lbs. Trailer Weight – 575 lbs. The F16 comes with a single axle galvanized trailer. Galvanized steel trailers are a little heavier than aluminum trailers and bring more stability when towing a lighter boat.
How much weight can a 15 ft jon boat hold?
Your 15 foot Jon boat therefore has an approximate weight capacity of 600 lbs.
How much does a 17 foot aluminum boat weigh?
How Much Does a 17 Ft Boat Weigh? Depending on the boat type, between 1,150 lbs. and 2,221 lbs., not including a trailer.
How do you increase the weight capacity of a Jon boat?
Ways to Add Buoyancy to a Jon Boat
- Add flotation pods.
- Move some of the heavier items to the front.
- Add PVC tubes.
- Built-in air cavities for buoyancy.
- Adding buoyancy using foam.
What size motor should you get for a jon boat?
This motor can propel a small Jon Boat 5 to 10 mph unless the boat’s cargo is very heavy. If you desire more power, choose a 5 to 20 hp motor. The recommended size for most Jon Boats is a 4 to 6 hp motor. This amount of horsepower will typically provide 40 to 60 lbs of thrust.
What is the best 16 foot ski boat?
The Mako Pro Skiffs were big news when they first hit the water, and we reviewed both the smaller model ( Mako Pro Skiff 16 Center Console: Small Wonder ) and its larger sibling ( Mako Pro Skiff 17 Center Console: A Hull New Innovation ) at that time.
What size anchor for 16ft boat?
Which type of anchor you use depends on what type of bottom you’re trying to hold. Basic 8lb Danforth anchor will hold a 17′ boat. Rope length standards call for 5 to 7 times the depth. Which means if you’re in 20 foot of water you should have out a min of 100 foot of rope min (5×20′). An 8 foot chain will help the anchor grab in and stay low.
How to build an aluminum jon boat?
How to Build an Aluminum Boat – Part One: Setting up the Jig. One of the first steps, and also one of the most important, in building your boat is setting up the jig. Boat hulls are constructed in a number of different ways, but for the purposes of this blog, I am going to focus on a design from MetalBoatKits.com.