How much HP does a M90 supercharger have?
Most M90 powered cars will generally max out around 400 wheel horsepower with an aftermarket camshaft, headers, and an intercooler. If you want to make more power than this then you may want to consider a larger supercharger or switching to a turbocharger.
Can you supercharge a 1uz?
Superchargers. If you drive a car with a 1UZFE, you could also opt for a supercharger instead of a turbocharger. While the 1UZFE supercharger kits are a little more expensive, it’s a great way to unleash the engine’s true power potential.
How much HP does an Eaton M90 add?
Holdener states, “We didn’t so much put a blower on there as a restrictor.” The M90 made a dismal 1.2-pounds of boost down low and a falling boost curve after that. With the supercharger, the 4.8 dished out 314 horsepower and 297 lb-ft of torque.
What cars have Eaton M90 supercharger?
Manufacturer Uses The M90 is designed as original equipment on three vehicle types. It is used on the Ford Super Coupe car series, and the General Motors 3800 Series L67 and L32 engines. The engineers at Ford and GM rely upon Eaton’s expertise in the design of the M90, and incorporated it into their engine designs.
How much oil does a Eaton M90 supercharger take?
Oil Chart for OEM applications with Eaton Superchargers
| Manufacturer/Engine: | Description: | Oil fill (fl oz): |
|---|---|---|
| Magnuson | Saleen M90 (4th gen) | 5.1 |
| Magnuson | Ford SVO 4.6L/5.4L | 6.8 |
| Magnuson | Magnacharger M90 (top mount) GM 5.7L trucks and SUV’s | 6.1 |
| Magnuson | Magnacharger M90 (side mount) 4.8L/5.3L/6.0L GM trucks and SUV’s | 6.1 |
How much HP can a 1UZFE handle?
For moderate power, the stock internals even on the later models should be capable of up to 500hp. With the correct internals, much like Toyota’s other awesome engines such as the 2JZ, the 1UZFE block is easily capable of achieving 1,000 horsepower on the right setup if you have big-power goals.
How much horsepower does a Eaton supercharger add?
around 50-100 horsepower
How much horsepower will a supercharger add? Connecting your supercharger to the engine intake can add around 50-100 horsepower. On the other hand, a turbocharger can add around 70-150 horsepower.
How is supercharger boost calculated?
Calculating Boost Ratio Add the boost pressure desired (5 Psi) for the engine to 14.7 Psi (atmospheric pressure). Divide this answer by 14.7 and this gives the boost pressure ratio. (21.7/14.7=1.476) This is the boost pressure ratio above atmospheric pressure.
Where can I find a M90 root supercharger?
M90 is widely found in Ford Thunderbird and other GM cars. They are cheaply found on auction sites. The above picture is a M90 root supercharger. However, the 1UZFE crank pulley is only 5.5″ and most 1UZFE root style supercharger runs it belt over the radiator hose.
Which supercharger for the 1uzfe?
Secondly, if you ever decided to lower the compression ratio to run more boost, then the MP112 would be the choice of supercharger for the 1UZFE. MP112 will allow room for improvement in the future. Do you have any questions?
What is a MP90 supercharger?
The Magnuson/Eaton Model MP90, 4th Generation is a “State of the Art” supercharger, engineered for 3.0 to 5.7 litre passenger cars and light truck engines. It was designed as a compact, flexible supercharger for increased power with original equipment quietness and reliability without adversely affecting fuel economy.
What kind of car is the 1uzfe?
The 1UZFE came in a variety of Toyota cars, ranging from sports cars to luxury cars. Toyota equipped the 1UZ in the Lexus GS400, LS400, and SC400. The 1UZFE was also equipped in the Toyota Aristo, Celsior, Crown, and Soarer.