How the Bendix pressure carburetor and how the float carburetor differ?
Unlike the float-type carburetor fuel system that relies on venturi suction to draw fuel into the engine, a pressure carburetor only uses the venturi to measure the mass airflow into the engine and manages the flow of fuel that is continuously under pressure from the fuel pump to the spray nozzle.
How does a pressure carburetor work?
Like a float carburetor, a pressure carburetor has a barrel with a venturi inside it through which air flows on its way to the engine cylinders. However, it does not have a float to control the flow of fuel into the carburetor. Instead, it has four chambers in a row separated by flexible diaphragms.
How does a Stromberg carburettor work?
Fuel is metered by a tapered needle mounted in the bottom of the air valve, and a fixed jet. As the air valve rises, allowing more air to enter, the tapered needle also rises in the jet, allowing the proper amount of fuel to mix with the air.
How do I identify my Stromberg carburetor?
Stromberg Carburetors are identified by a symbol usually found on one of three places: The Air Horn, the Main Body or the Throttle Body. The symbol usually is indicative of a series of similar units and does not refer to a particular application.
Who made Stromberg carburetors?
Bendix
Along with the units that were plopped on top of Flatheads at the Ford factory, Type I Stromberg 97s were manufactured by Bendix in South Bend, Indiana, as replacements for Holley 94s; most of these have the 97 logo.
What controls fuel pressure in a carburetor?
Fuel flow and pressure are controlled by the fuel control valve that is actuated by a diaphragm (D). The diaphragms movement up and down is limited by a spring (E). Fuel pressure (psi) to the carburetor is set with a threaded adjustment mechanism (F).
What are the disadvantages of the pressure carburetor?
More fuels are consumed since carburettors are heavier than fuel injectors. More air emissions than fuel injectors. Maintenance costs of the carburettor are higher than with fuel injection system.
How do you clean a Stromberg carburetor?
Clean it in place by washing with clean petrol; blow it clear with a foot pump . Remove a conventional jet by unscrewing the holder, using a spanner on the lower of the two hexagonal parts. Do not move the jet-adjusting screw, as this will alter the mixture (See Adjusting a Stromberg carburettor ).
What is a Bendix-Stromberg pressure carburetor?
Of the three types of carburetors used on large, high-performance aircraft engines manufactured in the United States during World War II, the Bendix-Stromberg pressure carburetor was the one most commonly found.
What is the fuel pressure on a Stromberg 97 carburetor?
The Stromberg 97 carburetor is designed for fuel pressure of 2.5psi MAXIMUM measured at the carburetor. Excess pressure can cause flooding which may cause a fire or explosion resulting in property damage, serious personal injury, or death.
How do I contact Stromberg carburetor customer service?
STROMBERG 97 OWNER’S MANUAL STROMBERG 97OWNER’S MANUAL If you need further information or assistance, please contact your Stromberg Dealer, or e-mail us direct at: [email protected] or log on to our Tech Center at: stromberg-97.com THANK YOU for choosing a Genuine Stromberg carburetor.
What are winter and summer settings on a Stromberg carburetor?
C)Winter and Summer Settings: Your new Stromberg 97 carburetor is supplied with the accelerator pump rod in the W (Winter) position on the throttle linkage. The S (Summer) and W settings partially determine the volume of enrichment fuel discharged into the venturi when the accelerator pump is rapidly depressed.