What are the outside walls of a mobile home made of?

The outside component of an exterior wall in a mobile house trailer is typically constructed out of one of three different materials: metal, hardboard or vinyl. This part of the exterior wall is the part exposed to the weather. Vinyl is the best siding to keep water from getting inside the wall.

What are the outside walls of a mobile home made of?

The outside component of an exterior wall in a mobile house trailer is typically constructed out of one of three different materials: metal, hardboard or vinyl. This part of the exterior wall is the part exposed to the weather. Vinyl is the best siding to keep water from getting inside the wall.

What is the wall in a mobile home called?

Vinyl-Over-Gypsum
The most common type of wall used for a manufactured home is called Vinyl-Over-Gypsum or VOG for short. VOG is drywall that is coated in vinyl wrap. This is different way of treating drywall as compared it being taped, floated, textured & painted.

How thick are the exterior walls of a mobile home?

Many mobile homes have wall material that is 1/4″ to 3/8″ thick. there generally is not enough strength in this material to support the weight with drywall anchors alone.

What is the cheapest siding for a mobile home?

Vinyl Siding It is relatively durable, inexpensive, and retains its look a long time. If you have a quality vinyl siding installed on the exterior of your home, it will likely look the same 20 years from now as the day it was installed on your home.

Why do mobile homes not have drywall?

Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.

What are VOG walls?

VOG walls are simply a 3/8” or 1/2” drywall pre-finished in a vinyl coating. These vinyl coatings come in many different patterns and colors, and, depending on the manufacturer, may be pre-selected for installation by the factory or custom selected by the home buyer.

How much weight can you hang on a mobile home wall?

In most cases, this should be able to hold between 50 to 100 pounds.

Can you hang things on manufactured home walls?

Hanging pictures in a mobile home requires more than just tapping in a picture hanger. Mobile home walls come in at only 1/4- to 3/8-inch thick; older mobile homes feature vinyl-coated walls and newer homes are outfitted with 3/8-inch drywall. In contrast, stick-built homes have a minimum of 1/2-inch drywall.

How far apart are the walls of a mobile home?

The exterior walls of mobile homes are framed with either 2×4 inch or 2×6 inch wooden studs. Sturdier homes are built with the 2×6 studs placed 16 inches apart.

What are the exterior walls of a mobile house trailer made of?

The outside component of an exterior wall in a mobile house trailer is typically constructed out of one of three different materials: metal, hardboard or vinyl. This part of the exterior wall is the part exposed to the weather.

Are the walls of a mobile home designed to carry weight?

PROBLEM – HUD is very specific that the frame and outer walls to the mobile home were only designed to carry the load of their own weight. Any structure that is adding weight to the walls for frame of the mobile home would not be up to HUD standards.

How to remove a wall in a mobile home?

How to Remove a Wall in a Mobile Home. Step 1: Turn Off Electricity and Water. Turn off the electricity in both the room you are in and the neighboring rooms. If possible, turn the breaker Step 2: Test for Wiring and Plumbing. Step 3: Remove Trim and Battens. Step 3: Flooring. Step 4: Removing