What is Belimo MFT?
Multi-Function Technology, only from Belimo, allows you to create custom solutions for individual applications, using the same programmable actuator. Whether you need a particular control or feedback signal, or need to change running speeds, MFT is the answer.
How do I manually open Belimo actuator?
The Belimo non-spring return actuators have a black, “manual override button” located on the top of the housing. Press this button and the gear train is disengaged so the damper shaft can be moved manually. Release the button and the gear train is re-engaged.
How does a Belimo valve work?
A modulating actuator will position, or throttle, the damper or valve as commanded by the controller to achieve a desired position or flow. An open/close, or on/off, control signal produces a two-position response (0% open or 100% open) for the damper or valve; usually with 24 VAC to 230 VAC contacts.
What is MFT programmable?
Multi-Function Technology (MFT), allows you to create custom solutions for individual applications, using the same programmable actuator. Whether you need a particular control or feedback signal, or need to change running speeds, MFT is the answer.
How do I set my belimo aircon?
Setting Temperature Press “ ” to reduce temperature, press “▲” to raise temperature (0.5°C per step). Mode Selection Press “M” to change system working in cooling “ ”, heating “ ” or ventilation “ ” mode. Fan Speed Selection Press “ ” to select (Hi), (Med), (Low), AUTO(Auto).
How do I bypass Belimo actuator?
To release, apply voltage or wind slightly more until the lock disengages. Non-spring return actuators have a manual override button on the side. Press the button to disengage the gearbox and manually position the actuator, release button to set the position. Apply voltage to return to electrical actuation.
How do you reverse a Belimo actuator?
Rotate the damper to its failsafe position. If the shaft rotates counterclockwise, mount the “CCW” side of the actuator out. If it rotates clockwise, mount the actuator with the “CW” side out.
What are Belimo actuators used for?
Actuators are used for control dampers, air handlers, economizer units, VAV terminal units, fan coil units, fan shutters, and unit ventilators.
What is an energy valve?
The Energy Valve is a pressure independent valve, which measures and manages coil energy by using an embedded electronic flow meter, along with supply and return water temperature sensors.
How do I unlock my belimo thermostat?
Key lock To lock or unlock the buttons, press & simultaneously and hold 5 seconds. When key lock is activated, buttons will no action when press it.