What is C4 02?

Sharp C4-02 error code means is for the PTC unit (Primary Transfer Charge unit) heater open trouble.… Sharp C4-02 error code means is for the PTC unit (Primary Transfer Charge unit) heater open trouble. You can disable it through the program to use the machine. 22.

What is PTC in Sharp copier?

Sharp MX-230CU Primary Charge Corona Wire Unit (PTC) Kit is used for the Sharp MX-2010U, MX-2310U, MX-3111U, MX-2610, MX-3110, MX-3610N, MX-2610N, MX-2615N, MX-2640N, MX-3110N, MX-3115N, MX-3116N, MX-3640N copiers.

How do I reset my photocopy machine?

1. Power the printer off completely.
2. While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
3. While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
4. Allow the printer to warm up as normal.

What is H5 01 Sharp copier?

For the common H5-01 error, for example, your machine is telling you it has detected five paper jams in the exact same place in a row. For issues like paper jams, your copier will shut itself down and will not run a print job until you have first cleared the paper jam and then cleared the error code.

What can go wrong with a photocopier?

Common Copier Problems and solutions

• Paper Jams. A paper jam is the most common copy machine error encountered.
• Lines on Paper.
• Cartridge or Toner Issues.
• Wrinkled Pages.
• Copies are Too Light or Too Dark.
• Spots on the Page.

What does H5 mean on AC?

H5 IPM Module Temperature Too High, High Ambient, Low Voltage, or Bad Connections.

How do you service a photocopier?

Photocopier maintenance: The ultimate guide

1. Read the instruction manual.
2. Clean that glass.
3. Remove dust from inside too.
4. Don’t forget about the ink cartridge head.
5. Maintain the paper rollers.
6. Use the right paper and parts.
7. Clean the drum.
8. Give the fuser a once-over too.

What is IPM in AC?

IPM (Intelligent Power Module) is a high-performance module that mounts a dedicated drive circuit for drawing greater performance from an IGBT chip, and it provides a custom IC for executing self-protection functions (short circuit, supply under voltage, and over temperature).

What is IPM malfunction?

There are several causes for a malfunction of the inverter module (IPM) on a Bryant/Midea ductless mini split, including: Valves Closed (double check all of them) Restriction to flow (cap left on or kink in the line) Shortage of charge. Wiring mistake.

Why is my photocopier not working?

Cartridge or Toner Issues Low, empty or malfunctioning toner cartridges can cause issues within your copy machine. If toner or cartridges are low or empty, replacing them should resolve the problem.

What is IGBT chip?

IGBT Chip. An Insulated Gate Bipolar Transistor is a BJT that is built in a way that allows for fast switching with low power losses, making it ideal for use as a switch in high power circuits. It is commonly packaged along with a flyback (also called freewheeling) diode, which prevents damage from inductive kickback.

What does the sharp c4-02 error code mean?

Sharp C4-02 error code means is for the PTC unit (Primary Transfer Charge unit) heater open trouble. You can disable it through the program to use the machine, but you must replace the PTC unit if the Trouble Code is continuously displayed.

How do I fix the c4-02 code?

I can’t remember the simulation but replacing the PTC solve the issue. You will need to replace the PTC unit. You can override the C4-02 code until you get the new unit. Look in your service manual under trouble codes and it has the explanation there, it is an engine soft switch setting.

Why is my PTC heater open trouble code c4-02?

PTC heater open trouble. You can dis-able it thru program to use the machine but it will continuously display the trouble code. I can’t remember the simulation but replacing the PTC solve the issue. You will need to replace the PTC unit. You can override the C4-02 code until you get the new unit.