What is C60 material?
C60 steel is an unalloyed medium carbon engineering steel which has 0.57%-0.65% Carbon as per EN10083 standard.It has characteristics similar to that of C55 carbon steel which has high hardness and high strength after hardening. C60 is difficult to weld,and machinability is poor due to high carbon content.
What is the chemical composition of C60?
C60 Carbon Steel Round Bar Mechanical Properties
| Chemical Composition | ||
|---|---|---|
| C | Si | Ni |
| 0.43-0.49 | 0.15-0.35 | |
| 0.53-0.59 | 0.17-0.37 | 0.3 |
| 0.57-0.63 | 0.17-0.37 | 0.3 |
What is C50 grade?
C50 steel plate, EN 10083 C50 steel plate, under EN 10083 standard, we can regard C50 steel plate as high carbon steel. C50 steel plate is one mainly of high carbon steel, EN 10083 C50 steel plate is one of the higher carbon content (0.47-0.55) steels.It is equal to DIN C50, JUS . 16301 and NF AF70C55.
Is C45 stainless steel?
C45 is a medium carbon steel grade offering reasonable tensile strength. Supplied in the cold drawn or hot rolled condition, tensile properties can vary but are approximately between 500-800 N/mm². This grade can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.
What is C35 concrete?
COMMERCIAL PROJECTS The C35 concrete strength mix is a strong and durable concrete mix used on the majority of construction fields such as Agricultural, Industrial, Commerical and Domestic. The C35 mix is ideal for loading bays or areas that bear constant heavy loads from industrial machinery.
What is C35 concrete mix ratio?
2 to 2.5 gravel 1.5 to 2 sharp sand, all depends on size of gravel.
What type of material is C45?
medium carbon steel
C45 grade steel is a medium carbon steel offering moderate tensile strengths. The material is capable of through hardening by quenching and tempering on limited sections but can also be flame or induction hardened to Hrc 55.
Does C45 steel rust?
The overall results show that all types of deposited layers increase the corrosion resistance of C45 steel. The experimental results revealed that the samples coated with a phosphate layer obtained by immersion in the zinc-based phosphate solution possess the highest corrosion resistance among the phosphate samples.