What is the speed of 10BASE2 network?

Fibre-based standards (10BASE-F) 10BASE-F, or sometimes 10BASE-FX, is a generic term for the family of 10 Mbit/s Ethernet standards using fiber optic cable.

What is the speed of 10BASE2 network?

10 Mbit/s.
The name 10BASE2 is derived from several characteristics of the physical medium. The 10 comes from the transmission speed of 10 Mbit/s. The BASE stands for baseband signalling, and the 2 for a maximum segment length approaching 200 m (the actual maximum length is 185 m).

What is the maximum speed in classic Ethernet?

between 3 to 10 Mbps
Classic Ethernet is the original form of Ethernet that provides data rates between 3 to 10 Mbps. The varieties are commonly referred as 10BASE-X. Here, 10 is the maximum throughput, i.e. 10 Mbps, BASE denoted use of baseband transmission, and X is the type of medium used.

What is 10BaseF alternatively known as?

Fibre-based standards (10BASE-F) 10BASE-F, or sometimes 10BASE-FX, is a generic term for the family of 10 Mbit/s Ethernet standards using fiber optic cable.

What does 10BASE2 10Base5 10BASE-T and 10BaseF mean?

IEEE shorthand identifiers, such as 10Base5, 10Base2, 10BaseT, and 10BaseF include three pieces of information: The number 10: At the front of each identifier, 10 denotes the standard data transfer speed over these media – ten megabits per second (10Mbps).

What is Ethernet LANS 10Base2?

10Base2 is among the family of Ethernet network standards for local area networks (LAN) that uses a thinner version of coaxial cable to establish a network path or medium and operates at a speed of 10 Mbps to carry out baseband transmission. 10Base2 is also known as cheapernet, thinwire, thinnet and thin Ethernet.

What is the difference between thinnet and Thicknet cable?

Thicknet was the original Ethernet wiring, but Thinnet, which is cheaper and can be installed more easily, is the more commonly installed Ethernet wire. Thicknet continues to be used for backbone wiring. An alternative to Thinnet on an Ethernet network is twisted pair.

What speed is Cat5?

The Cat5 Ethernet cable paved the way for high-speed internet with an ability to transfer data at 100 Mbps and 100 MHz bandwidth (100BASE-T or Fast Ethernet) but can run up to 2.5GBASE-T at shorter distances.

What is the speed of 100Base TX cable?

100 Mbps
The 100 Base-TX cables can support data speeds up to 100 meters and must possess minimum recommended node length of 2.5 meters between two cables. 100Base FX: In FX, the cable uses two pairs of fiber to support more than 100 Mbps.

What are Ethernet LANS 10Base2 10Base5 and 10BaseT?

10Base5 An Ethernet term meaning a maximum transfer rate of 10 Megabits per second that uses baseband signaling, with 5 continuous segments not exceeding 100 meters per segment. 10BaseT An Ethernet term meaning a maximum transfer rate of 10 Megabits per second that uses baseband signaling and twisted pair cabling.

What is the maximum supported throughput of Cat5e cable?

1000 Mbps
Cat5e can support network operating speeds of 10 Mbps, 100 Mbps or 1000 Mbps. The gigabit rates are the maximum speed for Cat5e cable.