Which fuse is for fog lights?

Purchase a standard 4-post fog light relay, a 30-amp inline fuse, a remote switch that lights up to show when it is activated, 2 rolls of wire–one 10-gauge and one 16-gauge roll, and a pack of assorted wire connectors.

Why is my fog light not working?

Blown Fuse: As a first resort, many mechanics will inspect your fuses in the event an electrical component, like the fog lights, fails. When a fuse blows, it prevents the circuit from completing and will not allow the lights to turn on. Burned-out Bulbs: Over time, bulbs will wear out and will stop working.

Is there a relay for fog lights?

The fog light relay is used as the switch to turn them on. As soon as you flip this switch on, the power is sent to the lights. Thanks to this relay a low voltage fog light switch is possible. This relay should last the entire lifespan of your car, but sometimes things can happen and it will need replacing.

How many amps do fog lights draw?

Well-Known Member. Each 90W device is going run at 90 Watt/12 Volt=7.5 Amps, so two of them are going to pull 15 Amps.

How do I know if my fog light relay is bad?

Usually a bad or failing relay will produce a few symptoms that can alert the driver of a potential issue.

1. Clicking sound from the relay. One of the first symptoms of a problem with the fog light relay is an audible clicking noise from the relay.
2. Fog lights are always on.
3. Fog lights do not turn on.

How do I turn my fog lights on?

Activate your fog lights by performing the appropriate maneuver. In the case of a switch on your headlight lever, pull the switch out and away from the steering wheel. If your vehicle features an in-dash button, depress the button so that the fog lights turn on.

Can you wire fog lights without a relay?

You can wire it without the relay, but you need to be extra careful and check all connections more often. If there is no power going through the wires then they will not function correctly and may cause problems for you in the future with your lights.

How many watts should a fog light be?

Run-of-the-mill bargain fog lights are typically rated 35 watts, while the better, higher-performance models can come with 100-watt output, or the equivalent in LED.

How many amps do halogen fog lights use?

A 35-watt halogen bulb running at 12 volts draws 2.92 amps. These lamps are typically used as fog lights and deliver 70 watts of light while using only 35 watts of power.