How do you reset the service light on a 2009 BMW?

Locate the small odometer button near the bottom left corner of the instrument panel. Press and hold it until the service message appears. Release the button, and press and hold it again until the message says “Reset?”.

How do I reset my BMW Oil Service?

To reset a BMW oil change light, you should:

1. Turn the ignition on but do not start the engine.
2. Hold down the odometer or trip reset button on the instrument cluster until the service menu appears.
3. Use the reset button to scroll through the settings until you find the oil change warning.

How do you reset the service light on a BMW e90?

Put your foot on the brake pedal and hold odometer reset until yellow triangle comes up. As soon as that happens; release it (odometer reset button) and use scroll on left side of steering wheel to find an icon that you want to reset service light for.

How do I reset my BMW 328i?

How to Reset a BMW Computer

1. Turn your ignition key to the accessory position when the lights and radio come on (before starting the car).
2. Press and hold the “Trip” button on the instrument panel until the red light comes on.
3. Press the “Trip” button a second time and hold until “Reset” appears.

How do you reset a 2008 BMW 328i?

How do I turn off the service oil light?

To reset the oil life monitoring system do the following:

1. Switch the ignition on.
2. Fully press the accelerator and brake pedals at the same time.
3. Keep the accelerator and brake pedals fully pressed.
4. After three seconds, a message displays confirming the reset procedure is in progress.

How do I reset my BMW idrive 3 Series?

iDrive shuts down fully when you turn off and lock the car, for about 12 minutes. In most BMWs you can also reboot it like a computer by holding the volume button in for 20-25 seconds continuously, which restarts the computer for the idrive system / navigation etc.