What is Loba easy prime?
Easy Prime is waterbased sealer for use with all Loba waterborne finishes.
How do you apply Loba finish?
Shake product, add hardener to base at a ratio of 10 : 1 and then shake to mix….Drying time
- Earliest possible recoating after 4-6 hours.
- Careful use possible after 4-6 hours.
- Earliest possible intermediate sanding after 8-10 hours.
- Light use after 24 hours.
- Full use and covering possible after 5 days.
What is bona traffic?
Bona Traffic HD is the world’s toughest and fastest drying lacquer. It allows for full traffic to be resumed just 12 hours after application, and was developed for application on large surfaces. Used in hotels, restaurants and airports worldwide, where short downtime is essential, it is a wood floor lacquer perfected.
How do you use Loba 2k Supra?
Recommended Procedure for cork floors: Apply first coat and allow to dry 2-4 hours. Apply the second coat and allow to dry overnight (reduces risk of granule swelling). Intermediate sanding with 180 grit perforated pad (or equivalent) to remove grain raise. Apply final coat.
How do you clean Loba invisible flooring?
Dry-clean the floor using mop, broom or vacuum cleaner. Dust and dirt behave like sanding paper and thus have to be removed immediately. If necessary (heavier stains etc.) the floor can be damp-mopped using LOBACARE Cleaner.
Is Loba or bona better?
Loba Supra vs Bona Traffic HD polyurethane These 2 products are far superior to any other water borne polyurethanes in the market place. They look better, last longer, smell less and cure faster. They really are similar and have similar benefits. They are designed to do the same thing.
How many coats Bona traffic?
2 coats
How many coats of Bona Traffic HD should you use? Like Mega One, Bona always recommends a minimum of 2 coats of finish. Adding a third coat gives an extra layer of protection that may be right for some homeowners who are worried about scratches.
What floor cleaners are pH neutral?
Bona Hardwood Floor Cleaner is a water-based, pH neutral formula that’s safe to use on unwaxed, unoiled or polyurethaned wood. It’s also GREENGUARD Gold Certified so it won’t harm people, pets or the planet. Bona sprays on easily and dries fast — there’s no measuring or rinsing or residue.
What is Loba invisible?
Loba’s 2k Invisible Protect is an innovative 2-component water based surface coating that gives your floors the look and feel of natural untreated hardwood while offering all of the protection of a finished floor.
What is Loba 2K?
Loba WS 2K Invisible is a two component waterborne polyurethane finish that delivers excellent performance in either commercial or domestic timber flooring situations.
Do you sand between coats of Bona Traffic HD?
For smoothest results, abrade between each coat as necessary, using a multidisc and Bona Diamond 180 to 240-grit abrasives with Bona Intermediate Pads.