Does OBDLink LX work with iPhone?

Read & clear check engine light – Check diagnostic codes yourself and make informed repair decisions. Works on smart phones, tablets, & PC’s – Turn your Android or Window smart phone, tablet, laptop, or PC into a sophisticated diagnostics tool and performance monitor. (Note: Not compatible with Apple iOS products).

Does OBDLink work with iPhone?

OBDLink MX Wi-Fi is designed to work on all iOS (iPhone/iPad/iPod), Android, and Windows products. Free OBDwiz software included!

How do I connect mx+ OBDLink to iPhone?

OBDLINK MX WIFI IOS QUICK START GUIDE

1. Step 1: Write down the 14-digit Wi-Fi Key.
2. Step 2: Download and install the OBDLink app from the App Store.
3. Step 3: Locate the OBD-II diagnostic connector in your vehicle.
4. Step 4: Plug MX Wi-Fi into the diagnostic link connector (DLC)

How do I connect to OBDLink LX bluetooth?

1. Plug LX Bluetooth into the diagnostic link.
2. connector (DLC)
3. Turn ignition to Key On, Engine Off.
4. position.
5. Open ‘Settings’ app, and enable.
6. ‘Bluetooth’
7. Press the ‘Connect’ button on LX.
8. Tap ‘OBDLink LX’ to pair the device.

How do I connect to OBDLink CX?

Please open the OBDLink app and navigate to Settings > Preferences > Communications > Communication Type and make sure this is set to Bluetooth LE. Once you have done this, power-cycle your CX by unplugging/plugging the device into your OBD port, then navigate back to the Homepage on your OBDLink app and tap Connect.

How do I connect to mx+ OBDLink?

1. Get the OBDLink app. visit www.obdlink.com/apps or scan the QR code.
2. Plug MX+ into the OBD port.
3. Turn the ignition to the “Key On, Engine Off” position.
4. Push the “Pair” button and select OBDLink MX+ in Bluetooth settings.
5. Tap “Connect” in the OBDLink app.

What can I do with OBDLink?

The OBDLink app for iPhone, iPad, iPod Touch, and Android is included with your purchase of any OBDLink adapter. With robust diagnostic capabilities, the app can read diagnostic trouble codes (DTCs), and clear check engine lights.

How do I reset my OBDLink MX?

Problems caused by incorrect settings, can be remedied by resetting MX to factory defaults. To do this, you need to hold the button for 20 seconds, while watching the ‘Power’ LED: it will switch to a rapid blink on success.