Can a system boiler be used with a vented system?

System boilers are usually set up to work with an unvented hot water cylinder, but they can work with vented cylinders as well.

Table of Contents

Do you need a boiler with an unvented cylinder?

Unvented cylinders, on the other hand, are connected directly to the mains. This removes any need for a cold water tank in the loft and is why they need to be installed alongside a system boiler.

Which is better combi or unvented?

Combis are great for smaller properties with few people and few hot outlets, or properties which lack space. If that isn’t you, I would recommend an unvented cylinder because the performance will always be better when compared to a combi.

How do unvented boilers work?

An unvented cylinder is connected directly to the mains water supply. It uses electricity or gas to heat water to a pre-set temperature. The act of heating water causes it to expand, which creates pressure within the cylinder. That pressure pushes the water outward throughout your home’s pipes.

Are system boilers Pressurised?

However, regular boilers are kept artificially under pressure with the use of a header tank in the loft (also called a feed & expansion tank), whereas system boilers use a pressurised heating circuit, topped up by mains water.

Is a combi boiler unvented?

However, they actually work in very different ways. For example: system boilers must be fitted alongside an unvented hot water cylinder, which stores domestic hot water until you need it. Whereas, everything a combi boiler needs, to provide your home with heating and hot water, is within the unit itself.

Are unvented cylinders worth it?

What are the benefits? Unvented cylinders free up valuable space in your property and tend to provide stronger water pressure than an open vented system. This is because unvented cylinders are directly supplied by the mains, but of course this depends on the strength of the mains in the first place.

Do unvented cylinders need servicing?

You should be aware that the cylinder installed in your property is a pressurised container and will require regular maintenance just like a gas boiler. An annual check is vital to ensure your safety and must be carried out by a qualified engineer.

Do you need a pump with a system boiler?

If the system is pressurised, you cannot install a pump. IF you have a good water pressure from the mains, then a pump is not necessary as you will get an excellent shower without. If the water mains is poor, the pump won’t work anyway as it has nowhere to suck the water from.

What is an unvented cylinder boiler?

Unvented cylinders are suitable for a variety of domestic and commercial properties. As mentioned in the previous section, unvented cylinders are perfect for a larger home. They can provide huge amounts of hot water at 60° all year round, which is something a combi boiler could never do. Most combi boilers only give a 35°-45° temperature rise.

What is an Unvented hot water system?

An unvented hot water system takes it’s cold water supply directly from the incoming water main. It is not gravity fed by a tank in the loft. They can be direct or indirect. As we have said an unvented cylinder is supplied by the incoming main.

How much does it cost to install an Unvented hot water cylinder?

How much does an unvented Megaflo boiler cost?

Unvented hot water cylinder installation costs can be anywhere between £500 to £2,000 depending on the work what is needed to be carried out for the boiler installation What is an Unvented Megaflo boiler system? A Megaflo system, which is commonly misspelt or heard as a ‘Megaflow system’ is a hot water cylinder made of stainless steel.