How do you use a Health o meter digital scale?
How to Set a Digital Health O Meter Scale to 0.0
- Remove the shipping plate from the bottom of the scale.
- Set the scale to either LBS or KG by adjusting the switch on the back of the Health o meter scale.
- Place the scale on a flat surface.
- Tap the lower corner of the scale with your foot.
Why does my Health o meter scale give me different weights?
My scale is giving inconsistent and/or erratic readings. For new scales; please make sure all the shipping blocks and plates have been removed from the scale. Check and make sure the floor where the scale is being used is level. Check and make sure all four feet are on the scale are level and properly adjusted.
How accurate is the Health o meter scale?
The best thing about the scale besides it’s sleek look, is the fact that it’s extremely accurate. Most spring scales will show you two different weights if you step on it twice in a row, this ones shows the exact weight to the decimal.
How do you calibrate a Health o meter digital scale?
How to Reset a Health o meter Scale
- Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level.
- Tap the lower left or right corner of the scale three times. After you do this, you’ll notice the display shows “—.”
- Wait a few seconds for the scale to reset and recalibrate.
How much weight can a Health o meter scale hold?
350 lbs
This Health-O-Meter is battery-operated and measures up to 350 lbs in 0.2 lb increments. Whether you’re trying to lose weight or just monitor your health, this device is designed to help makes it simple.
Do digital scales lose accuracy?
In general, digital bathroom scales are more accurate than mechanical ones. But for the most accurate reading, any bathroom scale must be set up correctly and used consistently.
Why does my digital scale give different readings?
In most cases, digital scales give different readings due to environmental factors and improper maintenance. If a device gives different or inconsistent readings, you can typically improve its accuracy by finding the root cause of the fluctuations.
How do you calibrate scales?
Calibrating Your Scale Power on the scale and allow it to warm up (usually 30 seconds) Begin the calibration mode sequence. Follow the instructions on the scale’s display. Once the calibration process has been completed, remove the calibration weight and return to normal weighing modes.
How do you set a Health o meter scale?
Have a blessed day! To reset a Health o meter digital scale, hold down the lower right edge of the scale until the scale displays “0.0.” A Health o meter scale should be reset whenever it is moved, before each weigh-in and any time the scale displays an error message or reads “E.”
How do you reset the Health o meter scale?
To reset a Health o meter digital scale, hold down the lower right edge of the scale until the scale displays “0.0.” A Health o meter scale should be reset whenever it is moved, before each weigh-in and any time the scale displays an error message or reads “E.”
How do I reset my scale?
Remove all batteries from the back of your scale. Leave the scale without its batteries for at least 10 minutes. Make sure that the battery compartment is clean, and the contact terminals are free of debris or residue. Check that the batteries have the correct polarity and reinsert them firmly in place.
How do I contact health o meter® professional scales technical support?
For more information regarding how to connect this scale to other electronic devices, please contact Health o meter® Professional Scales Technical Support, available during normal business hours at 1-800-683-3722. 500KL Scale Disposal This Health o meter® Professional scale must be disposed of properly as electronic waste.
How to use a digital weighing scale?
THE DIGITAL DISPLAY, REPLACE THE BATTERY. 1. Choose pounds (LB) or kilograms (KG) using the selector switch located on the back of the scale. 2. Place the scale on a flat surface. A hard surface is best for maximum accuracy. Placing the scale on a soft, deep pile rug may affect the weighing accuracy. 3.
Where is health O Meter® made?
Health o meter® is a registered trademark of Sunbeam Products, Inc. Boca Raton, FL 33431. Printed in China. © 2004 Sunbeam Products, Inc. Todos los derechos reservados. Health o meter® es una marca registrada de Sunbeam Products, Inc. Boca Raton, Florida 33431. cloth to remove dust. may damage your scale. This scale is designed for personal
How do I calibrate the scale?
A hard surface is best for maximum accuracy. Placing the scale on a soft, deep pile rug may affect the weighing accuracy. 3. Before each weighing, tap on the lower corner of the scale. The scale will calibrate and display “- – – -“, then ” 0.0 “. 4. Step on the scale and position your feet in a manner that will